|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- DIY ¿ëÇ°: Àü±â
- ºê·£µå À̸§: FGHGF
- ±Ù¿ø: CN (Á¤Ç°)
- Áõ¸í¼: NONE
¿É¼ÇÁ¤º¸[(193)Black]
290 points displayed, 0-350MHz fastest time 405ms, shortest zero span time 1.8ms, 10kHz RBW from 0MHz to 350MHz takes about 2 minutes, switchable resolution bandpass filter, suitable for 2.6kHz and two ranges between 640kHz spectrum analyzer is not a spectrum analyzer, it can use two frequency outputs as signal generator, MF/HF/VHF sine output at 0.1MHZ-350MHz, UHF square wave output at 240MHz- Between 960MHz, built-in - calibration signal generator for automatic self-test and low input calibration The spectrum analyzer can be connected with a PC via USB to implement the Serial USB (CDC) protocol and call a large number of commands via the serial interface. These commands can be used to perform measurements or update internal settings. After connecting to a Windows computer, the Windows driver will be automatically installed, and the kernel has a built-in Linux driver. The latest version V0.3.1 version information is "ESD protection", the installed diodes are more stable, more sensitive, higher anti-static level, and longer service life. Built-in 650mA battery, continuous use for at least 2 hours.
Colour: Black Material: metal + plastic
Package Contents: 1 set spectrum analyzer
Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
|
|
|
|