|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¸ðµ¨ ¹øÈ£: U2P20
- ½Ç½Ã°£ »ùÇøµ ¼Óµµ: 200MSa/s
- µð½ºÇ÷¹ÀÌ ÇØ»óµµ: no
- µð½ºÇ÷¹ÀÌ Å©±â: ¾Æ¹«µµ
- ¹êµå ³Êºñ: ¹Ì¸¸ 60 MHzÀÇ
- µðÁöÅРä³Î: 2
- DIY ¿ëÇ°: ELECTRICAL
- ºê·£µå À̸§: HLFEC
- ¿ø»êÁö: Áß±¹
Key Features
Connectivity
Main Type-C USB 2.0 interface
Auxiliary Type-C USB interface
BNC connectors (Standard Probe Interface)
Extension interface (Pogo Pin Connector)
Power Source
Input output ports
|
Direction |
Descriptions |
Protected Voltage Range |
USB 2.0 port |
InOut |
Connect to host computer |
4.75v ~ 5.25v |
Auxiliary USB power port |
Input |
Auxiliary power |
4.5v ~ 5.5v |
BNC connectors |
Input |
Connect to probes |
-100v ~ +100v (DC+AC) |
Extension interface |
InOut |
Extension probes and module |
0-3.3v |
Probe compensator |
Output |
3v // ~1KHz square wave |
? |
Designed to make your work enjoyable
DSCope U2P20 is an USB-based digital oscilloscope, which has a portable size (115x74x16mm), but powerful performance (up to 200MHz sample rate). With the easy-to-use and cross platform software, DSView, you can use your favorite computer to debug and analysis your circuits, observe the analog wave and its frequency spectrum at anywhere and anytime.
Technical Specifications
Vertical system
Bandwidth: |
50MHz |
Input coupling: |
DC or AC |
Input impedance: |
1M¥Ø // ~20pF |
Input sensitivity range: |
10mV/Div to 2V/Div |
Vertical resolution: |
8bits |
Maximum input voltage: |
peaks ¡Â ±100V |
DC gain accuracy: |
±6% |
Vertical position range: |
±5 divisions |
Vertical offset ranges: |
Volts/Div setting Offset rang 10mV/Div ~ 2V/Div ±100mV ~ ±20V/Div |
Common mode rejection ratio(CMRR): |
? |
Channel-to-channel isolation: |
? |
Horizontal system
Maximum sample rate(single channel): |
200MSa/s |
Maximum sample rate(dual channel): |
100MSa/s |
Time base range: |
10ns/Div to 10s/Div |
Maximum duration of time captured at highest sample rate (all channels): |
10ms (real-time capture) 100ms (single capture) |
Record Length (real-time capture): |
1M (2 channels enabled) 2M (1 channel enabled) |
Record Length (single capture): |
16M (2 channels enabled) 32M (1 channel enabled) |
Trigger system
Trigger mode: |
Auto Normal (ch0, ch1, ch0 & ch1, ch0 || ch1) |
Trigger position range: |
1% ~ 99% of record length |
Trigger holdoff range: |
1 us ~ 10 s |
Trigger types: |
Edge (rising or falling) |
Sensitivity: |
0 ~ 0.625 vertical division |
Trigger level ranges: |
±4.4 vertical division from center screen |
Waveform measurements
Cursors: |
Horizontal Width/Frequency/Period/Duty Vertical Amplitude |
Automated measurements: |
Frequency / Period / +Duty /- Duty / +Count Rise / Fall / +Width / -Width / BrstW Amplitude / High / Low / RMS / Mean Pk-Pk / Max / Min / +Over / -OVer |
Waveform math
FFT: |
Spectrum magnitude Length: 1K ~ 16K Vertical scale: Linear RMS or DBV RMS Window: Rectangle, Hann, Hamming, Blackman, Flat_top |
Math: |
Add / Subtract / Multiply / Divide |
Waveform display
Time domain: |
Real-time viewSingle capture view |
X-Y mode: |
Lissajous Figure |
System Requirements
Windows XP, Vista, Win7, Win8 & Win10
Mac OS X 10.12 or above
Linux: recent Ubuntu, Fedora, Arch, etc.
USB 2.0 Host port
What¡¯s in the Box
|
|
|
|
|