Feeder Hot Melt Machine PU Round Belt Welding Machine Drive Belt Connector Polyurethane Belt Hot Melt Machine
Voltage£º220V
Features: simple, convenient and firm connection
Temperature: adjustable temperature 0-300°C
The belts used for bonding are: PU round belts, triangle belts, pentagonal belts, PU tubes, plastic strips and other products that are easy to melt.
Note: The temperature of the hot melt device must be within 250 degrees when connecting, otherwise the physical properties of the polyurethane will be affected, and the interface of the polyurethane round belt will be easy to break when the connecting temperature is too high.
Note:
The shell of the fuser is made of iron sheet, which is of better quality than plastic. When connecting, the temperature of the hot melt must be within 250 degrees, otherwise the physical properties of polyurethane will be affected. When the docking temperature is too high, the interface of polyurethane round belt is easy to break.
1 Step
Use scissors to cut both ends of the round belt smoothly
(If the two ends are not flat, the surface of the round belt is
not fully fused, and the interface is easy to break)
2 Steps
Fix the cut round belt to the connector
(connecting pliers)
3 Steps
Adiust the Hot Melt Machine to within 250°Connect the belt
(The temperature of the fuser must be within 250° when connecting,
otherwise the physical properties of polyurethane will be affected)
4 Steps
After the round belt is hot-melted, lock the connector (connecting pliers) for about 2-3 minutes, and wait for the round belt to cool down
5 Steps
Take out the round belt and polish and trim the joints,The interface is flat, smooth, firm, not easy to break