|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ±Ù¿ø: CN (Á¤Ç°)
- Áõ¸í¼: NONE
¿É¼ÇÁ¤º¸[(29)Blackred]
Large resolution of 128x160 pixels for clear display of texts, image and pictures. Via the 1.8-inch TFT display you can leave the computer off and get the data directly from your micro-controller as well as the SD card reader on the back of the board. Bright, anti-reflective TFT display with large 1.8-inch diagonal screen and integrated SD card reader. Its large resolution of 128x160 pixels gives a clear presentation of text, image, and images. With a 1.8-inch diagonal screen and 128x160 pixel resolution, the matte surface and luminous but efficient back-light (max. approx. 50 mA) also allows for use in bright lit environments.
Pins required for SD card reader (not included) IO for the most streamlined wiring: (At least 3 IOs are required) 1.RST-directly connected to the reset signal terminal of the microcontroller, this IO can be saved 2.CS-connect to low level, the chip select is valid for a long time, this IO can be saved 3.AO-Connect IO control register selection 4.SDA-Connect IO to control data transmission 5.CLK-Connect IO to control SPI bus 6.LED-connect the high-level chip with 3.3V backlight and the IO can be saved IO used for standard wiring: (6 IO) 1.RST-Connect IO to control LCD reset 2.CS-Connect IO control chip selection 3.AO-Connect IO control register selection 4.SDA-Connect IO to control data transmission 5.CLK-Connect IO to control SPI bus 6.LED-connect IO to control backlight on and off or PWM to control brightness size:57.8x34x7.5mm Material:PCB colour:Black+red
Package Contents: 2 x 1.8 inch SPI TFT Display Module
Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
|
|
|
|
|