Description:
I. Features:
Multi-function, multi-variable, personalized, user-friendly and simple design, get started quickly.
This smart copy remote control is suitable for electric door remote control, retractable door remote control, garage door remote control.
II. Cloning Chip Types:
2260 (PT2260, SC2260, LX2260, HX2260); 2262, (PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240), 1527 (EV1527, HS1527, HX1527), FP52626-3AX58AX -4, HT6HT600, HT6180, 6, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, etc. Different chip manufacturers have different prefix chip model numbers, as long as the digital part of the chip is the same model number.
Note:
We generally do not recommend duplicating rolling code chips because there are many uncertainties when duplicating rolling code chips. When copying the rolling code chip remote control, it is impossible to determine whether the original remote control chip is an encryption chip. Therefore, we do not recommend duplicating rolling code remotes.
III. Usage Steps:
1. Clear the code: press and hold the unlock button and the lock button with two fingers at the same time; the LED light flashes 3 times quickly within about 2 seconds; release one finger (the other hand cannot be released), and then use the loose finger to loosen Quickly click the button three times until the LED light flashes rapidly; two fingers can be released; then press any key on the remote control; when the LED light is off, it means the code is cleared successfully (all four keys are empty); if you press the remote control After pressing any key of the controller, the light is still on, indicating that the original code has not been cleared successfully. You need to clear the code again, and the clone can be successful only if the code is cleared successfully. You can clean and clone code repeatedly.
2. Copy: hold the original remote control in the left hand and the remote control we cloned in the right hand, and keep the two remote controls as close as possible; press the first button of the two remote controls at the same time; after about 2 seconds, the LED light flashes twice quickly; After one second, the indicator light keeps flashing, release your finger; press the key after successful learning, and the light is always on, indicating that the first key code on the original remote control has been copied to another remote control; the same method can be used to turn on the first key code in turn. The second key, the third key... If the copy is successful, the remote control function is the same as the original remote control.
3. Recovery: When you accidentally clear the copy of the remote control code, you can press the copy of the two keys at the bottom of the remote control at the same time, the LED light will flash quickly, press any key and release it, it will be on for a long time, this indicates the remote control code has been restored. Be sure to delete the existing code from the remote before using our clone remote.
4. How to deal with the situation that some keys can be controlled, but the other keys cannot be controlled? You can use clear and restore operations as follows:
(1) Clear the code first;
(2) After clearing the code, copy the unsuccessful keys again, and the other keys do not need to be copied;
(3) Then clear the code again;
(4) Recovery code; at this point, the original key that was not successfully copied is now overwritten with the new code, and the original key that was successfully copied is now preserved. If the key is not copied after the second copy, repeat the above steps until all keys are copied successfully.
IV. Precautions:
1. Prerequisites for selecting a remote control: The original remote control function is normal, the remote control chip is the same or compatible, and the remote control operating frequency is the same.
2. The remote control can only copy the fixed code, learning code chip and part of the single-chip remote control (for the model of the copyable chip, see the model of the copyable chip).
3. Two-way remote control, rolling code remote control, and single-chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301, etc.
4. Before copying the remote control, please ensure that the existing password on the remote control has been cleared, and check whether the password is cleared successfully. Otherwise it cannot be copied.
5. Please make sure your remote control has enough power, the farther the distance between the two remotes, the better! If the copy distance is too close, switch different angles to copy. Press and hold the button on the original remote control, the sending signal is completely normal, and then press the button on the remote control to ensure that the function is completely copied.