1602 LCD Display 1Hz-500KHz Functional DDS Signal Generator Sine Triangle Square Frequency Sawtooth Wave Waveform
[Type 1]
Description:
Pattern Name: 1HZ-500KHZ
Used for alignment of audio equipment and up into the lower radio frequencies at the lower end of the Am band or Amateur bands
Feature:
The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave
Maximum output amplitude: ± 10Vpp (no-load)
Output impedance: 50¥Ø±10%
DC bias: ± 10V (no-load)
Display: LCD1602
Resolution: 1 Hz
Power supply: DC 3.5-10V output frequency range
Sine wave: 1Hz-500KHz
Square-wave: 1Hz - 20kHz (the valid range)
Triangle wave: 1Hz - 20KHz (the valid range)
Sawtooth wave: 1Hz ~ 20kHz (the valid range)
Package Included:
1 x DDS Function Signal Generator
1 x USB to DC Power Cable
[Type 2]
Description:
DDS function (waveform) signal generator. It can generate some specific periodic time function waveform (sine wave, square wave, triangle wave, sawtooth wave and pulse wave, etc.) signals, the frequency range can be from several microhertz to tens of megahertz. Function signal generator in circuit experiment and equipment It has a very wide range of uses in detection. So learning and designing circuits will also be used.
Specification:
DDS frequency range: 1Hz-500KHz
High-speed frequency (HS) square wave: 1MHz/2MHz/4MHz/8MHz, 16Hz signal
The offset and amplitude of the DDS generated signal can be adjusted separately through two potentiometers
Signals generated by DDS: sine wave, square wave, sawtooth wave, reverse sawtooth wave, triangle wave, electrocardiogram wave and noise wave
1602 LCD screen
5 keyboard.
Step frequency value: 1, 10, 100, 1000, 10000Hz
Automatically restore the last used configuration after power on
The offset is: 0.5pp-15Vpp
The amplitude is: 0.5Vpp-20Vpp
Output impedance: 51 Ohm
Package Included:
1 x DDS signal generator
1 x BNC signal cable
1 x manual
1 X USB power cord