350A New TK15 Professional Precision Battery Tester for LiFePO Coulomb Counter Free Shipping 12003196
Overview:
The TK15 is a new type of the high precision current collection capacity indicating parameter instrument, which is compatible with lithium battery,lithium iron phosphate batteries,lead-acid batteries and nikel-metal hydride batteries,hereinafter referred to as coulometer. It can collect the working state of the battery at anytime. It has various fatures,such as a wide range of operating voltage, low power, high accuracy in indicating. It can set the payload capacity and other parameters of batteries arbitrarily, and with automatic memory function when power down.
Desciption:
Type: Battery tester
Model: TK15
Operating voltage range: DC8-120V
Current: 350A
Overall Size: 66x40x10mm
Display area size: 32x23mm
External normal Sampler Size:23x18x5mm
Technical Parameters:
Working power consumption: 8.0mA (Max:10.0mA)
Standby power consumption: 0.5mA (Max:0.8mA)
Sleep power consumption: 50uA (Max:60uA)
Voltage acquisition accuracy: +/-1.0%
Current acquisition accuracy: +/-1.0%
Using ambient temperature rang: 0-35C
Backlight on current: 40mA (Max:50mA)
Backlight off current: 30mA (Max: 40mA)
Battery capacity setting value: 0.-590A
External normal sampler working current:30.0A (Max:50A)
External big sampler working current:50.0A (Max:100A)
Attention:The min voltage of the battery pack should higher than the min working voltage of the coulometer
Features:
1.The empty and full voltage of battery can be adjusted
2.The backlight automatic open when using
3.Automatic memory function when power down
4.Fast response rate
5.Low power consumption, automatic wake-up
Display:
1.Residual capacity of battery (Ah or mAh)
2.Capacity percentage and totem pole display
3.Battery voltage
4.Battery current
5.Powe output
6.Remaining time of charge and discharge
Application:
Wiring diagram£º
Fix the coulometer with tapping
screws from the front of the panel. As shown below:
Capacity and voltage setting£º
1. Press the¡° ¡±key for 3 seconds in the main interface and
enter the engineering mode;