The MB506 is a high frequency prescaler up to 2.4GHz that uses a frequency synthesizer to form a Phase Locked Loop (PLL).
It multiplies the split input frequency by a modulo of 128 or 256, and the output level is 1.6V peak-to-peak at the ECL level.
The frequency division ratio can realize the frequency division of 64 128 256 through the two-bit DIP switch or external interface.
Input frequency: 30M-3G, typical: 50MHz-2.4GHz
Input signal amplitude: -16dBm-5.5dBm (the higher the frequency, the greater the input requirement)
Input frequency: 30M-3G, typical: 50MHz-2.4GHz
Output amplitude: 1.0-1.6Vpp+1/2VCC
Input signal amplitude: -16dBm-5.5dBm (the higher the frequency, the greater the input requirement)
Single power supply: +4.5 to +5.5V typical +5V
The frequency division ratio can realize the frequency division of 64 128 256 through the two-bit DIP switch or external interface
Input and output interface: SMA female input impedance 50 ohms
Material: PCB
colour: green
Package Contents:
1 x Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
![](https://ae01.alicdn.com/kf/HTB1jacgGb1YBuNjSszeq6yblFXaA.jpg)
MB506 Module Microwave Prescaler 50Mhz-2.4Ghz Prescaler 64 128 256 High Frequency Prescaler
The MB506 is a high frequency prescaler up to 2.4GHz that uses a frequency synthesizer to form a Phase Locked Loop (PLL).
It multiplies the split input frequency by a modulo of 128 or 256, and the output level is 1.6V peak-to-peak at the ECL level.
The frequency division ratio can realize the frequency division of 64 128 256 through the two-bit DIP switch or external interface.
Input frequency: 30M-3G, typical: 50MHz-2.4GHz
Input signal amplitude: -16dBm-5.5dBm (the higher the frequency, the greater the input requirement)
Input frequency: 30M-3G, typical: 50MHz-2.4GHz
Output amplitude: 1.0-1.6Vpp+1/2VCC
Input signal amplitude: -16dBm-5.5dBm (the higher the frequency, the greater the input requirement)
Single power supply: +4.5 to +5.5V typical +5V
The frequency division ratio can realize the frequency division of 64 128 256 through the two-bit DIP switch or external interface
Input and output interface: SMA female input impedance 50 ohms
Material: PCB
colour: green
Package Contents:
1 x Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
![](https://ae01.alicdn.com/kf/HTB1bBJ0x5CYBuNkSnaVq6AMsVXa8.jpg)
![](https://ae01.alicdn.com/kf/HTB1.5.nGeySBuNjy1zdq6xPxFXar.jpg)
![](https://ae01.alicdn.com/kf/HTB1Z3d5GqmWBuNjy1Xaq6xCbXXaw.jpg)
![](https://ae01.alicdn.com/kf/HTB1dQp5GqmWBuNjy1Xaq6xCbXXaJ.jpg)