1) USB 2.0 computer power supply
2) DC 5V power supply
2. 24 Bit 192KHz recording bit rate
3. INPUT-MIX-DAW Control knob
4. Mono button: Switch between mono and stereo
5. HI-Z button
6. RCA stereo input and output
7. +48V phantom power
8. LOOPBACK button£º When recording on a computer, you can record only the sound of the microphone without recording the accompaniment.
9. 6.3 TRS main output and headphone output
¡¼Note¡½ The details are described at the end
![](https://ae01.alicdn.com/kf/S4cf82ec6930f431fbcc87eda286ca712Q.jpg)
¡¼LOOPBACK button¡½Suitable for computer recording
1. Unpressed state£ºOnly record the sound from the microphone.
2. Pressed state£º You can record sound from microphone, RCA input and computer input.
¡¼MONO button¡½switch between mono and stereo
1. Unpressed state£ºIt is a stereo status, it means that the right and left output signals are difference.
2. Pressed state£ºIt is a mono status, it means that the right and left output signals are the same.
¡¼HI-Z button¡½Suitable for high impedance instrument inputs
When connect to guitar, please use the 6.3 jack and press down" HI-Z" button.
¡¼48V phantom power¡½Only for 48V condenser microphone and XLR jack.
1. When you use 48V condenser microphone, please use XLR jack and press down "+48V POWER" button on the rear panel.
2. When you use dynamic microphone, please do not press down "+48V POWER".
¡¼Power supply¡½DC 5V
1. Computer
2. Adapter
Note£ºIn the package,there is one piece USB cable for PC power supply and signals` transmission, the adapter is not included in the package.