Screen size 4 inch
Spectrum Analyzer for 0.1-800MHz or, with Ultra mode enabled, 0.1MHz-6GHz
Signal Generator with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz when not used as Spectrum Analyzer.
Switchable resolution bandpass filters for both ranges between 200Hz and 850kHz
Built-in 20dB optional LNA
Color display showing 450 scan points covering up to the full frequency range.
Input Step attenuator from 0dB to 31dB (not in combination with LNA).
A built-in calibration signal generator that is used for automatic self test and (low) inputcalibration.
Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator
Rechargeable battery allowing a minimum of at least 2 hours portable use
Max input level +10dBm. Do not destroy your tinySA
Due to the low cost and very small form factor there are certain relevant tinySA limitations and tinySA Ultra limitations
The tinySA ULTRA includes:
Host (with 3000mAh battery, 4inch display) x 1
USB Type-C data cable x1
30cm ALSR100 SMA cables x2
SMA-SMA barrel connector x1
Antenna with SMA connector x1
Lanyard and touch plectrum x1
32GB Micro-SD card(plugged in the host) x1
Colour:black
Material:Metal
Package Contents:
1 set x Spectrum Analyzer
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.