|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ¸ðµ¨ ¹øÈ£: ATU-100-0A
- µð½ºÇ÷¹ÀÌ Å©±â: 3.0-4.9ÀÎÄ¡
- DIY ¿ëÇ°: ELECTRICAL
- ºê·£µå À̸§: meterk
- ¿ø»êÁö: Áß±¹
¿É¼ÇÁ¤º¸[(771)ATU-100-0A][(193)ATU-10-0A][(173)ANTUNER AT100M]
ATU-100-0A
The shortwave automatic antenna tuner contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping the amateur radio HF band of 1.8-30MHz. Built-in lithium battery, 3.7V, 1800mAh, you can use Type-C cable to recharge it. Equipped with 0.91inch OLED display, you can see the data clearly. Automatically tuned and do not need control wires, suitable for most radio stations. You can have a try.
Features: The shortwave automatic antenna tuner contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping the amateur radio HF band of 1.8-30MHz. Made of quality material, wear resistance, with stable and reliable performance. Built-in lithium battery, 3.7V, 1800mAh, you can use Type-C cable to recharge it. Equipped with 0.91inch OLED display, you can see the data clearly. Automatically tuned, no human and control wires are required, and it is suitable for most radio stations. One button to on/off, easy to use very convenient.
Instructions: Connect the radio, ATU antenna tuner and antenna. For the first use, please set the output power of the radio or power amplifier between 20-30W, or the high-power tuning can easily damage the antenna tuner. Set the radio mode, use frequency modulation mode. Choose the antenna band to use, use 20-30W power in frequency modulation mode, press the radio PTT, observe the PWR and SWR of ATU antenna tuner. ATU button TUNE use: short press (less than 1 second) ATU button, it is in reset state, long press (more than 1 second) ATU button is in tuning state. If the SWR display of the ATU antenna tuner in the transmitting state is £¾2.0, it means that the antenna is detuned.6.You need to use an antenna tuner. Press and hold the ATU button tune to tune and observe the SWR value. If the SWR is greater than 3.0 after tuning, the antenna will be detuned. In serious cases, it is not recommended to use more than 30W power, and the transmission power should be controlled below 30W; If the tuning is completed, the SWR display is less than 2.0, and the maximum power of 100W can be used for transmission.
Specifications: Name: ATU100 Tuner Material: aluminum alloy Color: black Display: 0.91inch OLED display Charge: USB Type-C cable Battery: 1 * lithium battery, 3.7V, 1800mAh (included) Voltage: typical + 12 V (DC10-15V, 13.8V) Working frequency: 1.8-55MHz Maximum current consumption: 400mA Maximum working power: 100W Maximum possible measurement power: 150W Minimum power required to starts tuning: 5W Minimum possible measurement power: 0.1W Measurement step for power up to 10W: 0.1W Measurement step with power higher than 10W: 1W Power measurement accuracy: 10% Maximum installation inductance: 8.53uH Minimum installation inductance step length: 0.05uH Maximum installation capacitance: 1869pF Minimum installation capacitance step length: 10pF Number of panel buttons: 3 (ON/OFF, AUTO, TUNE) Item size: 160 * 90 * 40mm / 6.30 * 3.54 * 1.57in Item weight: 413g / 0.91lb Package size: 175 * 122 * 55mm / 6.89 * 4.80 * 2.17in Package weight: 465g / 1.03lb
Packing List: 1 * ATU100 Tuner 1 * Type-C Cable
ATU-10-0A
This automatic antenna tuner works effectively in a wide band from 1.8 to 30MHz. The minimum starting tuning is 0.2W, and the maximum measurable power is 20W. It can be used in 20W SSB single sideband shortwave devices. FT8, CW, Frequency Modulation, AM and other continuous modes. 7 group LC combination reaction. It is suitable for small radio stations within 20W.
Features: The housing is made of fine quality materials that are resistant to wear and has a stable and reliable performance. This shortwave automatic antenna tuner can be used as both a shortwave power meter and a standingwave meter. The minimum starting tuning is 0.2W, and the maximum measurable power is 20W. It works effectively in a wide band from 1.8 to 30MHz. It can be used in 20W SSB single sideband shortwave devices. FT8, CW, Frequency Modulation, AM and other continuous modes. 7 group LC combination reaction. Equipped with a digital display, you can see the data clearly. Automatic tuning requires no human and no control wires, and is suitable for most stations. Built-in lithium battery, 3.7V, 1200mAh, and you can recharge it with a Type-C cable. One button to on/off, easy to use and very convenient. Use frequency: 2-30MHz extended to 54MHz maximum. It is suitable for small radio stations within 20W.
Easy to use: turn on the power, connect the shortwave machine to the automatic antenna tuning IN radio frequency line, antenna connected to the automatic antenna tuning ANT (BNC seat, or fast socket), am, fm, cw small power 1-5w tuned well (swr1.5 within), you can high-power with.
Specifications: Name: Automatic Antenna Tuner Material: aluminum alloy + printed circuit board Charge: USB Type-C cable Battery: 1 * lithium battery, 3.7V, 1200mAh (included) Working frequency: 1.8-30MHz T-PER: 0.2W (min) Power: 20W (max) Item size: 167 * 90 * 38mm / 6.57 * 3.54 * 1.50in Item weight: 371g / 13.09ounce Package size: 182 * 120 * 62mm / 7.17 * 4.72 * 2.44in Package weight: 437g / 15.41ounce
Packing List: 1 * Automatic Antenna Tuner 1 * Type-C Cable
ANTUNER AT100M
This antenna tuner has the built-in standing waves meter and power meter, and support multiple radio stations and antennas. The frequency ranges is 1.8MHz-30MHz. If you are interested in this product, come and have a try, it will not let you down.
Features: This antenna tuner has the built-in standing waves meter and power meter, support display of standing waves value, forward power and reverse power, which makes it has multiple functions. This antenna tuner support multiple radio stations and antennas such as dipole, long-line, end-feed, and vehicle short-wave antennas, etc. The frequency ranges is 1.8MHz-30MHz. Instead of directly applying open-source files, it has been completely designed to solve the problems of screen, random code and standing waves. Built in high-power active buzzer, when the button is pressed or the standing waves exceeds the set value, the automatic sound "drip --" will sound, timely remind the user to pay attention to the current standing wave, and once the product is hung at the antenna feeding place on the tree, the sound is still clear. The system has built-in 29 groups of storage bits (20 groups of automatic storage + 9 groups of user storage bits). When tuning, AI intelligent adapts 29 groups of storage bits to achieve the second adjustment. This product adopts 0.91 inch OELD display screen, which can display the tuning status, the power value, standing waves value, parameter adjustment and other functions, so that you can quickly use the product and obtain more functions. Built-in large capacity lithium battery to supplys power, so you can recharge it in time, the LED indicator is red during recharging and green when fully charged. The power ranges of 1-18Mhz or SSB/CW is 0.1W-100W, and of 18-30Mhz or FM/AM/FT8 is 0.1W-50W. Supporting over discharge and overcharge protections, which can greatly prolong the service time of the tool.
Specifications: Material: metal Frequency ranges: 1.8MHz-30MHz Power ranges: 1-18mhz or SSB/CW: 0.1W-100W 18-30mhz or FM/AM/FT8: 0.1W-50W Working power: Max 3W Recharging current: 5v1A Shutdown current: about 15uA Startup standby: about 13mA Battery: 1 * lithium battery, 3300mAh (included) Package size: 139 * 74 * 29mm / 5.5 * 2.9 * 1.1in Package weight: 370g / 13.1ounce
Packing List: 1 * Antenna Tuner 1 * Cable
1) We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2) Payment must be made within 3 days of order.
3) If you can`t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
|
|
|
|
|