|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: SNDWAY
- ±Ù¿ø: CN (Á¤Ç°)
- ¿À½Ç·Î½ºÄÚÇÁ ºÎÇ° ¹× ¾×¼¼¼¸® À¯Çü: ¿À½Ç·Î½ºÄÚÇÁ ÇÁ·Îºê ¹× ¾×¼¼¼¸®
- Áõ¸í¼: ¼¼·ý
- Áõ¸í¼: Ul
- type: DP750-100
- Model No: Micsig DP750-100 Voltage Differential Probe
Micsig Oscilloscope High Voltage Differential Probe Kit DP750-100 DC 5V USB powered 100MHz Bandwidth Less 3.5ns Rise time Specifications: Condition: 100% Brand New Item Type: Oscilloscope Probe
Model: | DP750-100 | Bandwidth: | 100MHz | Rise time: | ¡Â3.5ns | Attenuation ratio: | 50X; 500X | Gain Accuracy: | ¡¾2% | Differentialtest voltage (DC+AC PK)?: | 50X: 75V 500X: 750V | Common mode input voltage: | ?CAT II 1000V | Input referred noise: | ¡Â12mVrms (50X) ¡Â120mVrms (500X) | Common mode rejection ratio: | £¾ 80dB (DC) £¾ 80dB (100KHz) £¾ 60dB (1MHz) | Input Impedance: | Differential Input Impedance: 8M¥Ø||1.25pF Each input ground: 4M¥ØII2.5pF | Output voltage: | ¡Â1.4V | Power: | 1W | Power supply: | DC 5V, USB powered | Overrange alarm: | LED flashes | size: | Power box: length: 80mm width: 37mm thickness: 22mm Signal box: length: 49mm width: 25mm thickness: 12.5mm | Input cable length: | 33mm | Output cable length: | 100mm | Working temperature: | 0¡É-40¡É | Working humidity: | 10%-85% |
|
Features: Steps 1) When the oscilloscope used for measurement has the Micsig UPI multi-function probe interface, output the differential probe. The probe can be powered by connecting the terminal to the oscilloscope input channel. . 2) When the oscilloscope used for the test is a model produced by other manufacturers, it is necessary to connect the differential probe to the power supply first. The source adapter PA05 is connected, and the combination of the two is connected to the oscilloscope input channel; finally, the Type-C data cable is connected Connect to 5V DC power supply to supply power to the power adapter. 3) According to the voltage range of the measured signal, select the appropriate When the attenuation ratio. 4) Connect the signal input line on the differential probe signal box to the signal under test to start the measurement, if the measurement When the signal exceeds the voltage range of the current gear, the indicator light of the current gear will flash, please turn off the signal under test and disconnect it Power supply for differential probes.
Package Included: 1 x Set of Micsig Oscilloscope High Voltage Differential Probe Kit
|
|
|
|
|