100% brand new high quality
Size: 100*60*20mm
Colour: Black
Material: ABS
Product: Signal Generator
New Features:
Max. Output range: max. -10V to 10V., 2/3/4-wire 0-22mA sink or source signal. Voltage output can be exactly 0.00V
Output range can be 0-20mA, 4-20mA, 0-22mA, 0-1V, 0-5V, 0-10V, 0-2.5V, 0-3.3V, -5V to 5V, 1-5V, 2-10V, etc. switchable and adjustable.
Display modes can be: actual current/voltage signal value display, 0.0-100.0(%), 0.0-50.0 (Hz), switchable.
User can set 9 x fast signal output points, more convenient to do debugging.
Have battery capacity status indicator, and battery voltage value display function.
Support 24V operating power supply via wiring terminals and 5V from USB port, can be used in indoors or outside industrial site.
1000mAH 3.7V re-chargeable battery embedded inside, *Automatic stopping recharging battery when battery has been fully charged..
Output accuracy can be calibrated by user, precision 0.01V, 0.01mA output and LED display output signal value accurately.
Adjusting steps can be fine adjustment or rough adjustment, switchable.
Have short-circuited protection circuits and polarity reverse connection protection circuits in Brightwin signal generator.
Refined user-friendly external shell, refined accurate encoders` knob to adjust output signal, more slim size.
*Its default output range is 0-10V, 0-20mA, user can adjust it to make it output -10V to -10V, 4-20mA, etc., output ranges.
*Output accuracy can be calibrated by user.
Parameters Programming Insructions
1.Press down and hold button for 2 seconds to enter into parameter setting states, then LED meter displays "F001" (F001 is Parameter Code Number);
2.Turn the Knob to change the parameter code number (When entering into F002, user needs to enter password "+ - - +" first. );
3.When displaying parameters code number, Press down knob "OK" to enter into the corresponding parameter value setting state, then rotate knob to modify the parameters.
4.Press down the knob "OK" to save parameters setting and exit. LED meter displays next parameters code number ( If haven`t enter the password, the signal generator will be returned back to normally adjusting mode after setting "F001" value );
5.Rotate the knob directly till the last parameter code number "Fend" is displayed, then press down the knob to confirm and save.
The parameters setting is completed, and the signal generator returns back to normally operating status.
6.In parameters setting process, if no any operation to the generator for more than 10 seconds, the signal generator will exit setting status and return back to normally operating status.
Portable 0-5V 0-10V 4-20mASignal Generator Package including:
1 Unit x Original Signal Generator New Upgraded Version
1 Pcs x High quality 2A USB Cable
1 Set x Professional User Manual (Easy to understand).