100MINI Metal Detector High Sensitivity Metal Locator for Outdoor Gold Silver Copper Detecting AC 100?240V
Feature:
1. [High Performance] The detector has high sensitivity and stability, can identify different types of metals and find metal objects that are useful to you.
2. [Microelectronic Processor] The microelectronic processor is used to control the chip unit calibration and instrument self checking system, which can be scanned and tested conveniently and quickly.
3. [High Accuracy] With a long range search system and precise location detection system, it can accurately determine where objects are buried and locate them.
4. [With Frequency Adjuster] The detector can identify specific types of metals through the frequency adjuster, which improves work efficiency and reduces the labor strength of testing.
5. [Applicable To Multiple Objects] You can use the metal detector to explore more places to find treasures, find gold, silver, copper and gems.
Specification:
Item Type: Metal Detector
Material: ABS+Sponge Coating
Model: 100MINI
Transmitter Battery: Built-in rechargeable battery (Ni-Cr) 1000mAh (with built-in battery)
Receiver Battery: Built-in rechargeable battery (Ni-Cr) 1000mAh (with built-in battery)
Application: In addition to military applications, it is also widely used in: security inspections, archaeological treasure exploration, and prospecting.
Screen: Graphic LCD (0.5x6.5)
Screen Backlight: Red, yellow, green LED.
Microprocessor: 24 MHz
Control Buttons: Manual mode and automatic search scan
Scanner Antenna: Telescopic, 1
Handle: Special hub connection, removable, rotatable, with sensitive bearing, special rubber coating.
Working voltage: 9.6V-12V
Rated current: 1A
: 5 mW, 5 volts
Package List:
1 x Transmitter
1 x Receiver
1 x Power Adapter
1 x CD
1 x Suitcase
1 x Manual
How to use: 1. Hold the instrument and scan very slowly in an arc, turning yourself together. At this time, the prospector`s elbows should always be firmly attached to the sides of the body, and it is enough to turn about 40 degrees to 60 degrees. Note: The explorer must rotate slowly and keep the body steady.
2. Standardize your scanning actions. First, let the receiving antenna extend correctly. Make the receiving antenna right in front of you, open at 90 degrees to your body, and not deflect left or right.
3. When the antenna is aimed at the target, the instrument will be determined, even if you continue to survey across the target. When you feel this determination is valid, you keep this direction in mind. Then, move the instrument to the left or right about 10 meters, and repeat the process of determining the target. Observe the determined direction this time. The intersection of the two directions is the buried orientation of the target.
4. If you feel that there is still a certain deviation in the specific orientation just measured, you can determine it from another viewpoint. If the target is within about 10 meters, you should walk slowly and steadily along one of the prescribed routes. When you pass the target and are directly above it, the instrument`s antenna will on both sides. At this time, the position measured is very accurate. (Please refer to the instruction manual for specific operation instructions) The product has its own degaussing function (as long as the probe of the receiver is close to the ferrous metal, it can be demagnetized after three alarms)