LCD Display Transistor Test TFT Diode LCR-TC1 LCR-T7 Triode Capacitor Multi-meter Resistor Meter LCR NPN PNP MOSFET
![](https://ae01.alicdn.com/kf/Hbb53e05270ec4575adade88decaf03099.jpg)
LCR-TC1
Feature:
Self test with automatic calibration
Size: 70*90*26m/ 2.71x3.58x1.10 inch
Display:TFT Screen, Color Screen
Diode Range: less than 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT less than 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50M¥Ø
Inductance: 0.01mH-20H
Power Voltage: 3.7V
Power: Built-in Rechargeable Lithium Battery
Measurement results using TFT graphic display (160x128)
One-button operation
Auto power off (timeout setting)
Built-in high-capacity rechargeable lithium-ion battery
Lithium-ion battery voltage detection
Support Chinese and English
Warning: Built-in lithium-ion battery, it is strictly forbidden to immerse the tester in water or near heat source!
Warning: For your personal safety, please strictly observe the specifications and precautions for using lithium-ion batteries!
Transistor Detection:
After the power-off state or test is completed, put the test component into the transistor test area of the test socket, press the lock handle, press the multi-function key, the tester automatically measures, and the measurement result is displayed at the end of the test.
Warning: Always discharge the capacitor before connecting them to the tester! The tester may be damaged before you turn it on!
Warning:
We do not recommend using a tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!
Component placement:
The test socket is divided into transistor and Zener diode test areas, as described in 1.1.
Note: Do not perform other operations during the calibration process to avoid affecting the calibration accuracy!
Packing List:
1 x multifunction TFT transistor tester
1 x electronic component group (sent random)
3 x test hook
Short the three test sockets, press the multi-function button shortly, and the tester will automatically calibrate.
No other operations are required after disconnecting the short wiring according to the prompt during the calibration process.
![](https://ae01.alicdn.com/kf/H616a5129a8be4469b99c68d89c59b8bdO.jpg)
![](https://ae01.alicdn.com/kf/H17e29fb0cf81497ba1eb18f2346dc9e9e.jpg)
![](https://ae01.alicdn.com/kf/H6aa01b23e3bb41d1a8c4e3c454ef258fu.jpg)
![](https://ae01.alicdn.com/kf/H1f5f63c60e6548129d4a94ddd15e84d9C.jpg)
LCR-T7
Feature:
Automatic detection of zener diode 0.01-30V.
Self test with automatic calibration.
Support Hitachi IR coding.
IR waveform display.
Infrared receiving instruction.
Measurement results using TFT graphic display.
One key operation.
Auto power off (timeout settable).
Built-in high capacity rechargeable Li-ion battery.
Li-ion Battery voltage detection.
Used to detect NPN and PNP transistors, capacitors, resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, triacs and batteries
Specification:
Sweep range: 0.1MHz
Voltage: 3.7V
Display: 160 * 128 TFT
Battery: 1 * Li-ion battery, 3.7V, 300mAh
![](https://ae01.alicdn.com/kf/H02fa3baa6595495db3f1e007dbbb2c2ce.jpg)
![](https://ae01.alicdn.com/kf/H14541df70a5f4b2f83ec1e4fb373b4074.jpg)
![](https://ae01.alicdn.com/kf/H8d3d5eafd2c74f9481f269ee71bb14c0Z.jpg)