Packaging Details
- Unit Type:piece
- Package Weight:0.32kg (0.71lb.)
- Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
tyle="width: 920px; font-size: 16px;">
External S Meter SWR Practical Power Meter for Yaesu FT 857FT 897FT AI88
Description:
Description: Receive Display Settings:
1. Press [FUNC] key to enter the setup menu, enable the extended menu.
2. Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3. Rotate [DIAL] to select an external instrument display:
SIG: the input signal strength display
CTR: Discriminator Center Meter
VLT: battery voltage
N / A: blank
FS: buckle in the instrument 1mA full scale output signal calibration standard external instruments
OFF:Turn off the meter.
4. Press [FUNC] button to save the settings and exit the setup menu.
Emission Display Settings:1. Press [FUNC] key to enter the setup menu, enable the extended menu.
2. Rotate [SELECT] to call up the setup menu item No-061 [MTR ATX SEL].
3. Rotate [DIAL] to select an external instrument display:
PWR: transmit power display
ALC: Automatic Level Control voltage display
MOD: Modulation Level Display
SWR: SWR display
VLT: Display Supply Voltage
N / A: blank
OFF: Turn off the meter.
Calibration method is as follows:1. Press [FUNC] key to enter the setup menu, enable the extended menu.
2. Rotate [SELECT] to call up the setup menu item No-060 [MTR ARX SEL].
3. Rotate [DIAL] to select FS.
4. With a small flathead screwdriver to adjust the calibration adjustment hole rear, so the header pointer to full scale.
5. The calibration is complete!
NOTE: If you can not find the numbers 60, 61 menu, is this two radio hidemenu. Long press the F key to open the menu settings, the 1st menu set to ON, press the F key to open the exit to save the hidemenu