![](https://ae01.alicdn.com/kf/Hce34e7d5fbf84af28082f68a057c9591z/KVE60C-antenna-analyzer-0-5MHz-60MHz-standing-wave-impedance-analysis-RFID-detection-short-wave-talent.png)
aHR0cDovL2ZyZWVzaGlwLmNvLmty![](https://ae01.alicdn.com/kf/Hce34e7d5fbf84af28082f68a057c9591z/KVE60C-antenna-analyzer-0-5MHz-60MHz-standing-wave-impedance-analysis-RFID-detection-short-wave-talent.png)
![](https://ae01.alicdn.com/kf/Hb5b7a195bb1e4c0fbbf6605cb51d16308/KVE60C-antenna-analyzer-0-5MHz-60MHz-standing-wave-impedance-analysis-RFID-detection-short-wave-talent.png)
- Á¤È®µµ µî±Þ: WELL
- DIY ¿ëÇ°: Àü±â
- ºê·£µå À̸§: darhor
The latest version of the KVE60C illustrated antenna vector impedance analyzer (formerly KVE60B/KVE60C optimized upgrade version) is an instrument for 50 ohm antenna feeder system testing. Data can be provided that includes the standing wave SWR / impedance Z (and can separate the real R resistance and the imaginary X reactance) / and the local interference level S. Data forms include numbers, indicator bars, and graphics.
This instrument has a working mode of function of the signal source.
This instrument uses a detachable lithium battery and uses a Micro USB charging interface. Any standard-compliant USB charging cable or charger can be charged.
This instrument uses a professional display that can be used in an outdoor environment and can be used under strong light (visible under strong light).
The instrument can input a user-defined ID (such as a radio call sign).
Application range:
This instrument is usually used to check and adjust the antenna's resonance, bandwidth, and matching under amateur conditions.
user
This instrument requires the user to have certain basic theoretical knowledge and practical experience of radio, or use it under the guidance of such personnel.
NOTE:Can not test frequency, can not be used as LCR table
specification:
1. Display: Sharp half-transverse TFT, 16 million colors, QVGA resolution. External Mitsubishi hard and scratch-resistant acrylic protective lens.
2. Measurement range:
Standing wave: 1.00-99.99
Impedance: 0.1-999.9 ohms
Resistance: 0.1-999.9 ohms
Reactance: 0.1-999.9 ohms
3. Frequency range: 0.5-60MHz
4. Frequency stability: <3PPM
5. Frequency stepping: minimum 100Hz/step
6. Output level: 1dbm (characteristic parameters are based on 14MHz test)
7. Sweep width: 150K/300K/600K/1.2M/2.4M/6M/12M/24M/48M (Hz)
8. Scanning step: 500Hz/1K/2K/4K/8K/20K/40K/80K/160K (Hz)
9. Power supply: 3.7V 1800mAH polymer lithium battery
10. Charging power supply: Micro USB standard connector (must ensure that the output voltage is DC 5.0-5.5V, and the current output capability is >500mA)
11. Charging indicator: hidden two-color LED (not visible in non-charging state). In red charging, green is full.
12. Test interface: BNC
1. RF connector, BNC
2. Rotary encoder for frequency input, marker positioning, and other functions.
3. Encoder switch (press down to confirm), adjust the stride for frequency input, and other applications.
4. The battery status display bar displays the remaining battery level and will warn when the battery is low.
5. Boot time.
6. Custom ID display, can display the user-defined content (English characters or numbers)
7. Multi-function button prompt bar. Display the function of the current multi-function button.
8. Multi-function button.
9. Power button for power on and off.
10. Color display.
11. Operation prompt buzzer.
12. System reset hole.
13. Battery cover.
14. Protect the hand rope hole.
15. Charging indicator.
16. Charging Jack Micro USB