Display description£º
1.Voltage
Measurement range: DC8-100V
Display format
£¼10V display format such as:9.99V
£¼100V display format such as:99.9V
¡Ã100V display format such as: OL
Accuracy:±1%
2.Percentage Range£º0%¢¦100%
Display format
£¼10%display format such as:9%
£¼100%display format such as:99%
100%display format such as:100%
3.Battery symbol
¨çGraphical
Five cell symbol, each representing 20%
¨èDisplay format
SOC £¾90% display full cells
80%£¼SOC ¡Â90% the first cell is flicker
SOC¡Â80% display four cells
60%£¼SOC¡Â70% the second cell is flicker
And so on¡¦¡¦
C.Other Function£º
1.Turn on or turn off the display Short press the key to turn on or off the LCD display.
2. Battery specification selection
If you want to change the battery specification during using, you can set it as follows:
Step 1: Press the key for 1 second until the words like [60V L] appear on the screen (the specific display content varies according to the battery specification, see Table 1 for details), and then release the key;
Step 2: Short press the key to select the battery specification. See Attached Table 1 for specifications;
Step 3: Long press the key for 1 second or stop the key action for 2 seconds, the data will be saved and return to the normal display interface.
3.Calibration
All products have been calibrated before leaving the factory. If you think there is deviation, you can calibrate by yourself. The methods are as follows:
Step 1: Long press the key when the meter is powered off
Step 2: Input the standard DC 20V voltage
Step 3: The LCD displays CAL ¡æ PASS and returns to the normal display interface that means the calibration is successful, then release the key
4. Waterproof function
The panel of this product is embedded with a sealing ring. After installation, the panel has the waterproof function of life splash (as shown in Figure 2)