|
![](https://ae01.alicdn.com/kf/S2e429510e58441328c61e49ff79870f7Z/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) ![](https://ae01.alicdn.com/kf/S60200e1c19bc4a85b6fc736e267362794/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) ![](https://ae01.alicdn.com/kf/S98ca1317bcf6436dabf8d380771f5313r/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) ![](https://ae01.alicdn.com/kf/S39f5c8a9b51d464b88a47eeae493efee5/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) aHR0cDovL2ZyZWVzaGlwLmNvLmty![](https://ae01.alicdn.com/kf/S2e429510e58441328c61e49ff79870f7Z/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) ![](https://ae01.alicdn.com/kf/S60200e1c19bc4a85b6fc736e267362794/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) ![](https://ae01.alicdn.com/kf/S98ca1317bcf6436dabf8d380771f5313r/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) ![](https://ae01.alicdn.com/kf/S39f5c8a9b51d464b88a47eeae493efee5/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg) ![](https://ae01.alicdn.com/kf/S594c0cf9eb0f472580cce933a0da661eF/Operational-Amplifier-Op-Amp-Tester-Single-Op-Amp-Dual-Op-Amp-TL071-TL072-TL081-TL082.jpg)
- ºê·£µå À̸§: FGHGF
- DIY ¿ëÇ°: Àü±â
- ±Ù¿ø: CN (Á¤Ç°)
- Áõ¸í¼: NONE
¿É¼ÇÁ¤º¸[(350853)Àº]
Welcome to our store.
Our products have affordable prices and good quality. We support dropshipping and wholesale. If you want to work with us for a long time, please contact us and we will give you a very favorable price.Best Regards!
Common single-op-amp and dual-op-amp Screening circuit boards, finished boards, the circuit board can judge whether the IC can be used for amplification, and can roughly judge the conversion rate of the chip. IC1a in the circuit is connected to a multivibrator with a frequency of about 1Hz, and the OP Amp. to be tested is connected to a unity gain inverting amplifier working state. IC2 is an EX-OR gate, and its truth table is that the output is 1 when the two inputs are inverted. The original design D3 is green, because the solder mask of the printed board is green and not eye-catching, so it is changed to a yellow LED. For chips with a low conversion rate, the status indicated by the LED is steady yellow, and red will flicker faintly. This can also be used to roughly judge the conversion rate of the chip. Because most of the motorcycle chips on the market use low conversion rate instead of high rate, it can also be judged whether the chip is counterfeit or not.
Therefore, after power-on, there are the following situations: If OP Amp. is normal, points A and B of IC2 must be reversed, so C is 1, and it is still 1 after IC1b and 1d, so D3 of the yellow LED lights up, and the red LED goes out If the OP Amp. output is open, the C point of IC2 must always be 0, and it will become 1 after IC1c, so that the yellow LED is extinguished and the red LED D4 is lit. If the internal short circuit of OP Amp. makes the output voltage fixed to positive or negative, the output of IC1c is also a 1Hz low-frequency square wave, and the red and yellow LEDs will flash alternately. The actual test of low conversion rate such as: OP07, LM741, yellow is always on, red is slightly bright. Test chips with high conversion rates, such as TL071, NE5534, MC34071 and other chips, the yellow is always on, and the red is off. Single op amp model: LM741, LF356, NE5534, TL071, TL081, OP07 and other standard package single op amp. Dual op amp model: LM358, NE5532, TL072, TL082, MC1458, RC4558, OP275, AD827 and other standard package dual op amps. PCB size: 9.2 x 5.8 cm Power supply requirements: Voltage: 12VDC, current above 100mA. Colour: black Material: plastic
Package Contents: 1 x Operational amplifier
Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Dear friends,thank you for choosing our products
If you cancel the order or other reason, all the refund will be back to your account within 7 -10 days through ÇØ¿Ü.
About Shipping
If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
¡Ú If you`re from Russia, Please leave your full name and right phone number. It is very important!!!
Dropship and Distribution
For wholesale, we will offer discount if you contact us before you payment.
For drop shipping, we could send the goods to your customers directly and won`t leave any information about us.
About feedback
¡Ú Any feedback from you will be much appreciated.
We maintain high standards of excellence and strive for 100% customer satisfaction!If you are satisfied with our products, If you are satisfied with our products, sincerely hope that you can give us 5 stars.
|
|
|
|
|