Specification:
1. Range:
EC:0-10000us/cm (0-10ms/cm)
TDS : 0-10000ppm
Temp : -50¡ÆC-70¡ÆC (-58¡ÆF-158¡ÆF)
2. Resolution
EC: 10us/cm (0.01ms/cm)
TDS: 10ppm
Temp: 0.1¡ÆC (0.2¡ÆF)
3. Accuracy
EC / TDS : ¡¾ 2 % F.S
Temp: ¡¾1¡ÆC (¡¾2¡ÆF)
4. Battery: 4x1.5V (AG13) (not included)
5. Temperature Compensation: 0¡É-50¡É
6. Dimensions: 285mm x 35mm x 35mm
7. Weight: 100g
Features:
EC/TDS-661 soil meter is used to test the tds value and electrical conductivity of the soil to judge the salt content of the soil. At the same time, it has the function of testing the ambient temperature. Products are widely used in agriculture, forestry, Horticultural Planting, Tree Planting, Greenhouse planting, Agricultural planting, water treatment industries, etc.
Operating Information£º
1.Remove the protective cap.
2.Turn the meter on by pressing the ON key.
3.Place the probe to the desired depth and saturate the soil if needed with deionized water. Or immerse the electrode in the solution to be tested.
4.Waiting for the reading to stabilize.
5.Press the "C/F" button to switch between Celsius and Fahrenheit.
6.After use, turn the meter off by pressing the OFF key. Rinse the electrode with distilled water to minimize contamination.
Packing List £º
1*Waterproof Soil EC and Temperature
Tester
1*Small screwdriver
1*manual in english
EC-315 is a new type of multi-purpose high-precision waterproof EC and temperature tester, which can be used to measure soil EC and temperature, and check the condition of the measured soil. With automatic temperature compensation, it is less affected by ambient temperature. Widely used, suitable for Aquarium, swim aming pol, laboratory soil, hydroponics, food processing imal husbandry.
Measuring range:
EC: 0~4.00mS/cm
Temp: 0¡É~50¡É(32¡ÆF~122¡ÆF)
Resolution:
EC: 0.01mS/cm
Temp: 0.1¡É
Accuracy:
EC: ¡¾2%F.S
Temp: ¡¾1C (¡¾2¡ÆF)
Automatic Temperature Compensation: 0¡É~50¡É
Power Supply: 4x1.5V (AG13) (not included)
Operating Temperature: 0¡É~50¡É
Calibration: Manual, at one point through trimmer
Dimensions: 290mm ¡¿35mm¡¿35mm
Weight: 109g
1.Remove the protective cap.
2.Turn the meter on by pressing the ON key.
3.Place the probe to the desired depth and saturate the soil if needed with deionized water. Or immerse the electrode in the solution to be tested.
4.Waitina for the reading to stabilize.
5.Press the "C/F" button to switch between Celsius and Fahrenheit.
6.After use, turn the meter off by pressing the OFF key. Rinse the electrode with distilled water to minimize contamination.