Feature:
DMX512 wireless transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.
High effective GFSK modulate,communication design; 126 channels jumping frequency automatically, high anti-jamming ability.
126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability.
7 groups ID code settable,User can use 7 groups individual wireless net without any interfere each other in the same place. ( Tricolor LED displaying Indicators )
Specification:
2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male
Communication distance: 500M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels. frequency section
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )
Package size: 14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in ( L * W * H )
Package weight: 180g / 6.36oz
Operating Manual:
ID code and LED color corresponding relationship:
1: RED
2: GREEN
3: RED+GREEN
4: BLUE
5: RED+BLUE
6: GREEN+BLUE
7: RED+GREEN+BLUE
1). Press momentary switch above the side led indicator to indicate ID setting.
2). Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.
3). Working condition:
LED constant lit up: No DMX or wireless signal.
Red LED flash: Transmitting.
Green LED flash: Receiving
4) RF frequency 2.400 - 2.525G, total 126 channels, it¡¯s searching automatically.
5). ID Code ¡°1-7¡± groups ID code, press ¡®KEY¡¯ for setting, it only can work under same ID code of transmitter and receiver. ( Same LED Color )
Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted boards.
2. Press "Key" button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.
3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flash till received corrected same ID value, LED flash more fast once DMX data more fast.
Packaged including:
1T = 1pc transmitter +1pc power adapter
1R= 1pc receiver + 1pc power adapter
1T 1R= 1pc transmitter + 1pc receiver +2pcs power adapters
1T 2R= 1pc transmitter + 2pcs receivers+3pcs power adapters
1T 3R= 1pc transmitter + 3pcs receivers+4pcs power adapters
1T 4R= 1pc transmitter + 4pcs receivers+5pcs power adapters
1T 5R= 1pc transmitter + 5pcs receivers+6pcs power adapters
1T 6R= 1pc transmitter + 6pcs receivers+7pcs power adapters
1T 7R= 1pc transmitter + 7pcs receivers+8pcs power adapters
2T 4R= 2pc transmitter + 4pcs receivers+6pcs power adapters
2T 5R= 2pc transmitter + 5pcs receivers+7pcs power adapters
2T 6R= 2pc transmitter + 6pcs receivers+8pcs power adapters
FAQ
Q : Can I use this with microphones ? Can I use to make the microphones wireless ?
A : No....this is for wireless DMX control of lights not audio .
Q : Does it have a 5 pin adapter for connecting to the DMX port on a lighting console?
A : It is a 3-Pin. If you need 5-Pin, you can contact customer service .
Q : How many receivers can a transmitter work with?
A : One transmitter can beused unlimited receiver