NEWACALOX 700W LCD Digital Display Hot Air Gun Welding Station 220V EU Plug 100-500¡É Temperature Adjustable Heat Gun Rework Tool
Feature:
1.Use microcomputer control,warming-up quickly,to the setting temperature only within 3-5 seconds
2.Digital LED display,High power,Temperature stabilization and is impervious to air,Use the brushless fan,and long life and low noise.
3.Automatic cooling function for effectively prolonging the heater`s life and protecting the hot air gun.
4.Safely remove BGA-IC,keep pins intact,Much more safe and reliable,Blowing PCB will not make it blister
5.Upgrade the ceramic heating core. When the fan is short-circuited, it cannot dissipate heat for the heat gun handle. The heat gun handle will enter the overheat protection and automatically cut off the power to prevent the handle temperature from being too high.
6.Essential product for cell phone repair, laptop repair, circuit boards, etc,Suitable for unsoldering multiple components,such as SOIC CHIP QFP PLCC and BGA etc (especially for flat cables and cable connectors).
7.Applicable for hot contraction heating,depainting,degluing,defrosting,Preheating and rubber soldering and so forth.
Specification:
Power Voltage: 220V
Plug type:EU
Power consumption:700W
Blower fan :Brushless Fan
Amount of Wind:120L/m(MAX)
Temperature Range:100¡É-500¡É
Handle Length :120cm
Noises :<45db
Weight:1.96KG
Note:
Due to the handle have Precision Horizontal Sensor,When you pick up the handle ,tube nozzle toward up, the gun will automatically step into standby model.when the temperature is less than 100 Degrees,the screen display(---),the equipment is on standby model,after temperature of heating element is less than 70°,it will automatically stop rotation,it use for protecting the hot air gun life.