Feature:
1.Mini spot welding
2.One-hand operation/four-grid power display/low, medium and high three-speed welding mode/mini battery spot welding
3.Suitable for precision welding of lithium battery nickel sheet, battery small plate replacement, stainless steel sheet, stainless iron sheet, etc.
4.Type-C charging
5.Copper spot welding
6.Weldable to nickel mobile phone battery, support welding IP/HW/MI/MZ/OP/VI and other mainstream mobile phone batteries
7.Four-grid power display; short press the button to switch gears, long press to turn on, and automatically shut down after 10 minutes of no operation
8.Battery display: 100%/75%/50%/25%
Visualizacion de la bateria: 100 %/75 %/50 %/25 %
9.Small and portable, conforming to the size of the human hand, more ergonomic design
How to use it :
*Take note to fully charge the battery before use*
1. To Turn On/Off - Long press button for 3 seconds then release the button after hearing the boot sound,that is turn on/off.
2. Short press the button. If the buzzer rings, that is shift position. Press one time, and it can add 1 gear. 1-9 cycles, and the 9th gear is the strongest welding strength.
3. Soldering Operation - Start with level 1, unit will start soldering after 0.5 seconds once it detects item. Power setting can be adjusted to suit different soldering job. If high level going into current protection mode and reboot,you can connect a USB input;
4. Auto Power Off - After no activity for 15 minutes the unit will automatically shut down.
5. USB Output - The USB output will be activated automatically once connected. Once output current is less than 50mAh the unit will automatically cut power output. Short press button to resume power output.
6. Error Warning - If the device fails, the buzzer keeps beeping after turning on;
7. Firmware Update - The upgrade port is reserved, which can be upgraded to the latest firmware