|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ±Ù¿ø: DE (¿ø»êÁö)
- ¸ÂÃã °¡´É À¯¹«: ¾Æ´Ï´Ù
- Áõ¸í¼: NONE
- Item model number: T12
- Power: 75w
- Input voltage:: AC 100-240V 50/60Hz
- Temperature range:: 40¡ÆC- -500¡ÆC
- Display form:: LED
- Temperature stability:: ¡¾5¡ÆC (static)
- Heating core voltage:: DC24V soil 10%
- Tip-to-ground impedance:: <20
- Tip-to-ground voltage:: <2mV
- Operating temperature:: 0~40¡ÆC
- Storage temperature:-: -20¡ÆC~80¡ÆC
- Storage humidity: : 35%~45%
¿É¼ÇÁ¤º¸[(350686)T12A][(350853)T12X]Before purchasing, please carefully read the parameter specifications, function comparison, setting instructions, menu introduction, operating instructions, and function settings of the product Features The heating speed is fast, the temperature control is accurate, the temperature recovery is fast, the setting is user-friendly, the setting options are diverse, it has ambient temperature compensation, various protection and energy-saving technologies, and has a buzzer prompt. Thank you for your patronage of our smart soldering station. Please read the manual carefully before use. After reading, please keep it properly for future reference. safety rules When using this machine, the following basic measures should be followed to avoid electric shock to human body and avoid the danger of fire phenomenon.
1. In order to ensure personal safety, please unplug the power cord after the machine is finished working! 2 The parts approved or recommended by the original factory must be used, otherwise serious consequences will be caused. 3. Machine failures must be repaired by professionals. 4. This product uses a three-wire grounding plug, which must be inserted into a three-hole grounding socket. Do not change the plug or use an ungrounded three-pin adapter to cause poor grounding. 5. After the welding station is turned on, its temperature may reach above 400¡É. Do not use near flammable, explosive gas, objects. Do not touch the metal part of the soldering iron to prevent burns. 6. Do not leave the work post after the welding station is turned on. 7. When installing or replacing parts of the soldering iron, it must be done after turning off the soldering station, and the installation or replacement must be done after the soldering iron has cooled down. 8. Never use a soldering iron for work other than soldering; never hit the soldering iron on the work surface. 9. There will be smoke when welding, please make proper ventilation facilities. Specifications Item model number: T12 Power: 75w Input voltage: AC 100-240V 50/60Hz Temperature range: 40¡ÆC- -500¡ÆC Display form: LED Temperature stability: ¡¾5¡ÆC (static) Heating core voltage: DC24V soil 10% Tip-to-ground impedance: <20 Tip-to-ground voltage: <2mV Operating temperature: 0~40¡ÆC Storage temperature:- -20¡ÆC~80¡ÆC Storage humidity: 35%~45% Four, function table Function Function pair table Model: T12 Display form: LED Soldering iron sleep function: yes Automatic shutdown function: yes Celsius/Fahrenheit conversion: none Temperature Correction: Yes Four-stage storage: none Instructions for use and setting of T12 soldering station 1. There are four working modes: temperature enhancement mode, working mode, sleep mode, shutdown mode 1) .Enhanced mode, press the encoder to enter the temperature enhanced mode, the enhanced temperature can be set from 5-100¡ÆC, and the enhanced time 1-30 minutes can be set 2) .Working mode, the working temperature range is adjustable from 40-500¡ÆC, the preset temperature is 300¡ÆC 3) Sleep mode, press the encoder twice to enter the sleep mode, the sleep time is adjustable from 0 to 60 minutes; the sleep temperature 400- 300C adjustable. . 4). Power off mode: ¨çPress the encoder three times to enter the power off mode. ¨èTurn off the soldering iron after hibernation, and place it on the handle of the soldering iron Dormancy for 10 minutes (can be set), sleep for 30 minutes (can be set), it will automatically enter the shutdown mode, at this time the heating core stops Stop the heating screen display ------- symbol, if you want to wake up the host to work, you need to press the encoder. display form Menu introduction: Press and hold the encoder for 3 seconds to enter the function settings P-0: Enhanced temperature setting (default 50¡ÆC) P-1: Temperature enhancement time setting (default 5 minutes) P-2: Sleep temperature setting (default 200¡ÆC) P-3: Sleep time setting (default 1 minute) P-4: Shutdown time setting (default 30 minutes) Temperature calibration, there are high-medium-low three temperature value correction points, the calibration has to wait until the screen A small dot appears in the middle of the three digits of the displayed calibration temperature, and then enter the actual calibration value of the soldering iron P-5: The actual test temperature, press the encoder to confirm and skip to the next point to test, correct After three points, press and hold the encoder for three seconds to save and automatically return to the main interface. P-6: restore factory settings, 0 cancel 1 confirm Job description: 1. In the case of enhanced mode, the first decimal point of the digital tube will be always on. 2. In the sleep state, the last decimal point of the nixie tube is always on. 3. Sleep and wake-up mode: pick up the handle to wake up or press the encoder to wake up. 4. The handle is in poor contact or the heating core is damaged. The screen displays the ERR letter. 5. Normal temperature adjustment slow rotation - grid 1¡ÆC, fast rotation 5¡ÆC-10¡ÆC-20¡ÆC. 6. When the set temperature is reached, the buzzer will make a short sound, enter the enhanced mode with a long sound, and enter the sleep mode--long two Short, enter the shutdown mode, one long and three short. Notice 1. When there is product damage, product loss, logistics problems, please contact me first, and I will properly handle the problem for you.
2. Regarding the delivery, after you place the order, we will deliver the goods for you as soon as possible to ensure the logistics timeliness.
3. If you have not placed an order and have any questions about our products, please contact us in time, and we will reply to your information in time after receiving the message!
4. If there are other quality problems, we will refund immediately after receiving the product photos.
5. Our goal is to provide 5 star service, if you think we are not worth 5 stars, please contact us before leaving feedback.
6. We are very welcome to cooperate with Droshipping, if you are interested in cooperation, please contact us in time, we will give you a price you like!
Dear friend, looking forward to your order!
|
|
|
|
|