Rework Solder Soldering Iron YIHUA 853D 5A USB 2A 1A SMD DC Power Supply Hot Air Gun Rework Solder Station temperature control
Packaging
What`s in the box
* main unit + gun + power cord
* guide
* soldering iron
* soldering iron holder +gun frame
* 4 nozzles
*1pcs IC pick-up
Technical Data:
Power consumption ¡Â1000W
Measurement 214*187*249MM
Working environment 0~50°C
Storage environment -20-80°C
Hot Air Reworks:
Airflow type brushless fan gentle wind
Aiflow ¡Â120L/min
Temperature range 100°C-480°C
Temperature Stability ±1°C
Display Type LED Display
Soldering Iron:
Temperature range 200°C-480°C
Temperature Stability ±1°C
Tip of ground voltage <2mV
Tip ground impedance <2 ohm
Display Type LED Display
Iron heater material Imported high-power heater
Iron handle color black
Outer Q`TY 4PCS /CTN
DC Power Supply:
Output Voltage DC 0~30V
Output Current 0~5 adjustable
Load stability <0.01±2mv
Temperature coefficient <300ppm/°C
Ripple dB <1mvrms(virtual value)
Display Type LED Display
3 IN 1
- Soldering Iron
- DC Power Supply
- Hot Air Gun
Mobile phone &computer repair both get!
Product Parameters
Whole Display
7 Core Quantites
-4-Digit Current LED Display;
-1 Key Toggle (air gun manual/automatic mode);
-Accurate Temperature Controls,Constant Temperature Stability (PID Microcomputer technology);
-Maximum Air Flow 120L/min,Brushless Fan Type Air Gun with Soft Airflow;
-Fine Craftsmanship, Fine Material;
1.High-temperature resistant eco-friendly flame retardant air gun handle);
2.High-temperature resistant silicone soldering iron handle cord;
3.Dual-Sided SMT Board;
-500mA USB Current 0utput;
-10 Mins Automatic Hibernation;
5V USB output interface,500mA USB current output
5V USB Output Currentof Up to 500mA,it can charge most large smartphones available on the market;
Most of the markets similar machine USB output current largest only 50mA and it is unable to charge large smart-phones and other devices or slow charge.
Intelligent sleep (Any accident excluded)
If the machine is not used for 10 minutes, the soldering iron will automatically enter sleep mode.
The model can effectively avoid the loss of the iron head, it not only can save energy and protect the environment,but also can lengthen the service life of the soldering iron tips and heating element.
when soldering iron usage is detected,the machine will automatically wake up to restore the set temperature.
Intelligent sleep dormancy
Stop work more than 10 minutes ,the temperature began to cooling down.
The temperature dropped to 200 degrees C, it enter into sleep state,the screen is switched between 200 degrees C and "SLEEP".
Shake soldering handle up and down several times or Press any one button, the iron will return to work state quickly then turn the power switch on and off also can wake the iron.
Our Hot Air Handle
YIHUA products adopts high temperature resistant flame-retardant material to mold separately, the round handle feel good and more suitable for ergonomic design.
Anti-folding line tail and thermal windows opening clear and uniform, dimensional design not only can loose heat,but also to dust.
YIHUA hot air handle cylinder for the card-point design,scientific and rational, solid easy to use.
Our handle and the wind muzzle adopt high temperature flame retardant environmental protection materials, its cost higher thousands of RMB than ordinary materials .
(Some businessmen only wind muzzle ring used this material)
Quality Base:Dual-Panel
SMT dual-panel technology
The machine inside adapt SMT dual-panel technology,it has the neat technology,the signal and flow-direction is very clear,the machine stability can be further inmproved,and it canuse a variety of harsh environments.
High temperature silicon cord
Features:
1.With magic temperature compensation technology.
2.Dual core microcomputer processor, quick temperature correction and more stability, durability and reliability
3.Soldering iron with pliable Silicone cord.
4.Hot air gun with "Auto cool down" feature.
5.Smart temperature detection, open circuit protection, short circuit protection, and overload protection.
6.You can use hot air gun, soldering iron & dc power supply separately, with no interference with each other.
7.Suitable for mounting and reworking SMD components by hand.
8.Suitable for SOIC, CHIP, QFP, PLCC, BGA and temperature-sensitive components.
9.Fits for heating shrink, drying, lacquer removal, viscidity removal,ice-out, pre-heating and glue soldering.
10.ESD safe design of soldering iron to protect sensitive components & CE approved.
SPECIFICATIONS:
· Model: YIHUA-853D 1A(15V 1A)
· Dual Core Microcomputer Processor
· Total Power Consumption: 765 Watts
· Air Flow Type: Brushless Fan With Soft Air
· Max Air Flow Volume: 120L/min
· Hot Air Gun:700W, Temperature Range 100°C ~ 480°C with Auto Cool Down Safety Feature
· Soldering Iron: 45W, Temperature Range 200°C ~ 480°C
· DC Power Supply Output Voltage: 0 ~ 15 Volts
· DC Power Supply Output Current: 0 ~ 1 Amps
· Working Environment: 0°C ~ 50°C
· Storage Environment: -20°C ~ 80°C
Patented products, counterfeiting not allowed
Patent No.: 2011300160506
Characteristic
1. 3 must-have functions in 1: Soldering, hot air rework and DC power in one metal case. Improve your working efficiency. Better organize. Save time, save space and save energy. The three sections have their own switches, can work independently or together.
2. The heart of this station is Dual-core microcomputer processor and PID technology to trace temperatures on air gun and iron in real time and compensate temp precisely and quickly by built-in PID control program. So keeping temperature stability within 1oC and quick temperature rising to set value. ESD design on soldering iron section can protect sensitive components.
3. Designed for SOIC, CHIP, QFP, PLCC, BGA and temperature-sensitive components. Soldering iron with anti-static design to prevent electrostatic damage on dedicated SMA components. Very good for electronics product, such as cell phones and smart handsets repair.
4. The power supply is high-precision DC power supply with Constant Voltage and Current, output voltage:0-30V DC adjustable, output current :0-5A adjustable, Power supply with overload protection, high accuracy, reliability, designed for scientific research, product development, laboratories, schools, portable computer repair, electronics production lines etc.
5. Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode. Sensor on handle leads to operating mode (high temp) when picked up or to standby mode (low temp) when laid down. Avoid accident caused by human mistake.
6. The air gun automatically enters standby when the temperature is less than 70oC threshold.
7. With short circuit, open circuit, over-temp and over-load protection.
8. Automatic cooling function for effectively prolonging the heater`s life and protecting the hot air gun.
9. Fits for heating shrink, drying, lacquer removal, viscosity removal, ice-out, pre-heating and glue soldering.
10. CE approv