|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: XMSJ
- ±Ù¿ø: CN (Á¤Ç°)
- Ãâ·Â Àü·Â: 60W
- ÀÔ·Â Àü¾Ð: 220V
- Ãâ·Â ¿Âµµ: 0-480
- Áõ¸í¼: NONE
¿É¼ÇÁ¤º¸[(496)Yellow Gun][(691)Black Gun][(865)Green Gun][(350853)Yellow Gun Set][(200006157)Black Gun Set][(10)Green Gun Set][(29)Tin Sucker]
Specifications:
Product name: 60W Automatic Soldering Gun Material: Plastic handle EU plug is connected to 220v voltage US plug is connected to 110v voltage Current: AC Power: 60W Voltage:110/ 220VAC Temperature range: 0-480 (¡É) Standard soldering iron tip: 5.8mm Dimensions: 205x170mm
Features:
Performance characteristics. The solder gun adopts a lightweight mechanism design, making work easier. High-quality heating element, longer working life. The soldering iron tip and heating core are easy to replace, easy to operate, and easy to complete the welding operation. It is rated to use tin wire with a diameter of 0.8~1.2mm. The newly developed product solves the trouble of changing tools and waste of working time for welding at different temperatures, and improves work efficiency.
Instructions:
1. When the hand welding gun is used for the first time, it must be preheated for a few minutes. It is normal that there is smoke, and it will disappear in a few tens of seconds. 2. Straighten the rated tin wire and insert it from the tin inlet until it touches the tip of the soldering iron and then stop wearing the tin until the tin wire is delivered to the tin guide nozzle. Pull the trigger and it will work normally. 3. When you need to withdraw or replace the tin wire when you stop using it, just push the plate up and take out the tin wire at the same time. 4. When replacing the heating core, first remove the protective cover, remove the development heating core connection, and then remove the soldering iron tip to replace the heating core.
Precautions:
1. At work, the temperature of the soldering iron tip and the soldering iron tube is as high as 400 degrees, and it is strictly forbidden to touch them to avoid burns. 2. When the hand welding gun is out of use, please place it on its holder. 3. It is forbidden to use solder guns in flammable and explosive situations. 4. It is forbidden to put the solder gun in a damp place, and it is forbidden to put it in a place where children or children can get it. 5. Please do not repair or dismantle the solder gun without authorization. If any part or wire is damaged, it can be repaired only by a person who is qualified for electrical and electrical product maintenance. 6. After the work is completed, turn off the power and wait for complete cooling before storing.
How to use the solder sucker:
1. First press down the piston of the solder sucker until it is stuck. 2. Use an electric soldering iron to heat the solder joints until the solder melts. 3. While removing the soldering iron, quickly paste the solder joint on the nozzle of the solder sucker and press the button of the solder sucker. 4. The operation is not clean at one time, and the operation can be repeated many times.
Tips for using solder sucker:
1. Make sure that the piston of the solder sucker is well sealed. Before powering on, use your fingers to block the small hole of the solder suction head and press the button. If the piston does not easily pop out into place, it indicates that the seal is good. 2. The aperture of the solder sucker head has different sizes, so choose the appropriate size to use. 3. When the solder suction head is worn out, replace it with a new one in due course. 4. Dip a little rosin every time before touching the solder joints to improve the fluidity of the solder. 5. The time for the head to touch the solder joint is a little longer. When the solder melts, take the solder joint pin as the center, draw a circle in a clockwise direction with your hand outwards, and then press the solder sucker button.
Package Included:
1 x 60W Automatic Electric Soldering Gun
Note:
1. Manual measuring, please allow a little 1 ~ 2mm error, thank you. 2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please allow a little color difference.
|
|
|
|
|