Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck
Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
Very sturdy,will worke good to remove existing solder from a circuit board
Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering. It allows one hand operation,just cock it and press the trigger button when you are ready
A must have excellent solder sucker which fits nicely in your tool box. If you need to fix household appliances,this tool will help you keep solder off everything when putting the new leads in
A couple of tips for the customer:
If you can not get the solder to melt with your iron,apply a little solder to it first - it will help conduct the heat into the existing solder
Ultimately,this thing is pretty much disposable and limited time use,every couple joints you desolder you should take it apart and clean out the solder to keep it working
How to Use the Desoldering Pump:
Step 1 - Press the plunger down until it is been locked and you will hear a click
Step 2 - Make the tip of the soldering iron to the solder joint and allow the solder to become fully liquid
Step 3 - Move the tip of the pump next to the molten solder. Move the iron out of the way and immediately cover the liquid solder puddle with the pump`s tip,pull the trigger
Step 4 - Repeat this process if necessary
Product Description
Weight: about 60g
Special Design: right or left handed design allows easy one-handed use
colour: silver+blue
Material: Aluminum+plasic
size: Length is about: 165mm
Diameter: 19mm
Package Contents: 3x Suction tin pump
KINDLY NOTE
If some items have a slight smell from the paint applied,this smell will dissipates after a few days
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.