|
aHR0cDovL2ZyZWVzaGlwLmNvLmtyProduct description:
Material: Aluminum Quantity: one set Length 50cm / 1.64ft Diameter: 1.6 mm feature: 1. Wide range of applications-suitable for welding or surfacing welding of alloys with high strength, good forgeability and corrosion resistance. 2. High-quality materials-made of aluminum, non-toxic, odorless, and durable. 3. No need for solder powder-no need to use other flux powder with aluminum alloy as flux and coating as base. 4. Application-including welding filler wire and spraying and flame metallization welding wire. It can also be used for argon arc welding and filling materials of pure aluminum, and for connection with aluminum bus bars and guide rods in electrolytic aluminum plants, as well as electricity, chemicals, food, etc. 5. Perfect welding effect-the design has sufficient and smooth welding effect, because the product has internal powder, excellent weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing performance. usage: 1. Clean and polish the physical surface. 2. Heat the surface of the metal material until the temperature of the metal wire reaches the working temperature of 380¡ÆC to 400¡ÆC. 3. When repairing thin aluminum, heat the aluminum-based metal to an appropriate working temperature, and then use the metal wire to rub and melt to form a weld. 4. Use propane gas to weld small objects, use industrial gas or induction heating device to heat and weld large objects, and cool down naturally after welding. Please note: 1. The thicker the condition, the more difficult it is to heat up, so it is important to use a reasonable heat source. 2. As long as the surface temperature of the base metal reaches the working temperature of the welding wire, welding can be started. 3. When using acetylene welding, neutral flame welding should be used, but do not directly burn the welding wire. 4. Applicable heat source: such as propane, oxyacetylene, etc. 5. Storage: Please store in a dry and ventilated place. 6. The metal surface must be clean. 7. The temperature of the base metal should reach 400¡ÆC, including the temperature of the base metal during the welding process, which should be kept at 400¡ÆC. The temperature can be high or low. 8. Due to the difference of light and screen settings, the actual color of the item may be slightly different. 9. Due to different manual measurement methods, please allow slight size differences. 10. It is strongly recommended for professional use.
Package list:
100PCS* aluminum welding rod
Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.
|
|
|
|
|