20PCS Plastic welding rods ABS/PP/PVC/PE Welding Sticks 5x2mm for Plastic Welder gun Bumper Repair Welding Supplies
Features:
*100% brand new and high quality.
*Non-toxic and tasteless. It resists acid, alkali, and corrosion.
*ABS welding rods used for battery car's shell / motorcycle's shell/ computer's shell etc.
*PP welding rods used for Bumper cars, front and back baffle plate of cars, battery car's battery shell, motorcycle's inner plate, PP plastic water tank, PP pipe etc.
*PVC welding rods used for PVC plastic water tank, PVC pipe, plastic doors and casement etc.
*PE welding rods used for chemical bucket, dustbin, chemical pipe, beer box (box), logistics turnover box (box), catering turnover box etc.
*It is widely used in daily life, practical and useful.
Specifications:
*Type: Plastic Welding Rods ABS/PP/PVC/PE Welding Sticks
*Optional material: PVC (grey), PP (white/black ), ABS (beige), PE (white)
*Size:200x5x2.5mm (Approx.)
*Quantity: 20/50pcs
Package Contents:
Package 1#: 20*Plastic Welding Rod (PVC / PP white/ PP black / ABS / PE)
Package 2#: 50*Plastic Welding Rod (PVC / PP white/ PP black / ABS / PE, each 10pcs)
Product description:
1. Aluminum welding rod is pure aluminum welding wire with aluminum content greater than 99.7%. It is a versatile welding material with a wide range of uses.
2. Excellent welding effect-due to the internal powder, it has a sufficient and smooth welding effect. Low melting point (380°~400°), strong weldability and corrosion resistance, high thermal conductivity, high electrical conductivity, and excellent processing performance.
3. No need for solder powder-you don't need to use other flux powders that use aluminum alloy as the flux, but use the salt base as the coating. It is very convenient and easy to solder.
4.Wide service life-suitable for welding or surfacing welding of alloys with high strength, good forgeability and corrosion resistance.
5.Various uses-mainly used for argon arc welding and filling materials of pure aluminum, and connection with aluminum busbars and guide rods of electrolytic aluminum plants, as well as electricity, chemicals, food, etc.
6.Light weight and small size-size is 330*1.6mm, weight is 3.5g, very easy to bend and carry.
Instructions:
Step 1: Clean and polish the physical surface.
Step 2: Heat the surface of the substrate until the temperature of the welding wire reaches the working temperature of 380degree Celsius~400degree Celsius. Therefore, the heat transfer welding wire of the parent metal can be used to form the welding seam, and the flame should not be used. When the surface temperature of the base metal is high enough, the metal wire can be Flows well and penetrates into the metal capillary.
Step 3: When repairing thin aluminum, just heat the aluminum-based metal to a suitable working temperature, and then use the steel wire to frictionally melt back and forth to form a weld.Only the wire melted with a metal brush can be welded at the weld.
Step 4: Use propane gas to weld the object, use industrial gas or induction heating device to heat and weld the large object, and cool down naturally and slowly after welding.
Life application:
It can be used for a variety of heat sources, such as propane, oxyacetylene, etc. Low temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum, cast aluminum, aluminum alloy, and dissimilar welding between the above metals, even if it is severely corroded or oily white Metals and even aluminum alloys that cannot be repaired can be repaired. Suitable for all-round welding by primary welding operators, only a small heating device is required, and the welding strength after welding is generally higher than the strength of the base metal itself, and you can understand the gas welding operation .
note:
1.The metal surface must be clean.
2.The temperature of the base metal should reach 400 degrees, including the temperature of the base metal during the welding process should be maintained at 400 degrees Celsius, and the temperature can be high or low.
Product Specifications:
Quantity: 10PCS
Material: Aluminum
Color: silver
Melting point: 380°~400°
Diameter: 1.6mm
Length: 33cm / 1.08ft
Weight: about 3.5g / 0.12in (a piece of aluminum welding wire)
Recommended for welding or brazing aluminum alloys: 1060, 1350, 3003, 3004, 3005, 5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and 711.0
Package list:
10 *Aluminum welding wire