basic version
LIGITAL LCD DISPLAY & TEMPERATURE CONTROL: Precise data control (±10¡É/shift for Temp) with Large LCD Display for subtle operations. You can adjust the temperature and airflow as what you need.
Strong Power With 2 Air Flow Settings:2000W super power and dual heating wire,provides strong power quickly heat up to 1112°F in seconds,Ultra-high efficiency can meet your demands at any time. Two Air Flow Settings I:300L/min and II:500L/min(±50L/min) .
High Quality and Safe:It has good temperature resistance.Our product also has the high temperature protection function, the heat gun will stop working when the temperature is too high,and the power cord has passed UL safety certification ,which can keep you safe while using.
Various Nozzles & Accessories:Equipped with four heat gun nozzles,which can be used for shrink wrapping, soldering, paint stripping, tube bending, BBQ, crafts, phone, car wrapping, stickers, etc.
updated version
Features
1. Grille-type air outlet design, uniform and powerful air supply
2. Double heating wire, overload protection, fast heating, not afraid of overload
3. PP+GF30 main shell, more heat insulation, anti-drop and anti-scratch
4. Two-speed wind speed adjustment switch and key temperature adjustment knob design, adjust the temperature according to your own needs
5. 365 high-power pure copper motor, uniform and stable operation, longer service life
6. Blue LED display, high-definition display anti-glare
Precautions for safe operation
1. Please connect the power according to the voltage marked on the tool.
2. Be sure to hold the tool tightly at all times when using the tool at high places.
3. Do not place the tool until the tool has completely stopped.
Note: countries with a voltage of 110V cannot be used, please purchase carefully, the default delivery is in Europe, and countries with different plugs need to use adapters.
Working temperature: 60-600¡É
Air flow: 300-500L
Plug: European standard
Working voltage: 220/240V
Noise decibel: 50-60 decibels
Heat gun safety precautions
1. Do not use the heat gun as a hair dryer.
2. Do not point the hot air blower directly at people or animals.
3. Do not use it near flammable materials or flammable gases.
4. Do not block or cover the hot air inlet and outlet.
5. When the hot air is in use or just after use, do not touch the nozzle. The handle of the hot air gun must be protected.
Keep dry.
6. The heat gun should be completely cooled before it can be stored.
Maintenance and Repair
Do not use turpentine, paint mixture, gasoline or similar substances to clean up.
1. When you stop working, please lower the temperature slowly, blow out all the hot air in the air duct, and then turn it off.
Turn off the switch and turn the hot air cylinder vertically upside down on a flat work surface.
2. When storing the hot air duct, please confirm that the hot air duct is completely cooled.
3. Always remove the dirt accumulated in the air inlet and keep the air inlet and outlet clean.
4. Check all extended insulated wires, if damaged, replace them immediately, do not use damaged insulated wires
cords, as it may cause injury from electric shock if touched.
5. All repairs must be done by an authorized service center or other qualified service organization to ensure safety.
integrity and reliability.
Top version
With the function of delayed shutdown, the hot air gun continues to blow cold air to cool the heating core, protect the heating core and prolong the service life
Insulated heating core imported from Germany
Mabuchi-Motor imported from Japan
Product features:
1. The double heating wire rises rapidly
2. Mica heat insulation of gun barrel is safe and reliable
3. ABS nylon engineering handle is comfortable to hold
4. Two gear wind speed regulation is suitable for many scenarios
matters needing attention:
¨ç When using the hot-air gun, try to use it in a dry place.
¨è When the hot-air gun is used or just after use, do not touch the nozzle to avoid scalding.
¨é The handle of the hot air gun must be kept dry, clean and away from oil or gas.
¨ê After the hot-air gun is used, the air outlet is upward and can be stored only after the air gun is cooled.
¨ë Do not block or cover the air inlet and outlet of the hot-air gun.
Safety warning:
1. Don`t use it as a hair dryer for blowing my hair.
2. Do not point the hot air gun directly at people or animals
3. Do not use near inflammables and flammable gases
Product parameters:
Working voltage: 220-240V / 50Hz
Power consumption: 2000W
Temperature range: 60-650 ¡É
Temperature regulation mode: Key temperature regulation
Air volume: 100 / 300 L / min
Switch: second gear wind speed adjustable
Shell material: PP + 15% glass fiber
Rear cover shell material: ABS
Motor: Japan 365 Mabuchi-Motor
Heating cylinder: Luo iron plated material
Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework
Power cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding
2-1.0m3 into the machine part, with an outer diameter of 6.8mm