|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ±Ù¿ø: CN (Á¤Ç°)
- Áõ¸í¼: NONE
Product packaging 1 x F1621 Torch Height Controller HTC
1 x lifting body
1 x lifting body accessories
A torch height controller developed by a portable CNC plasma cutting machine. It uses industrial grade ARM as the hardware core, which is stable and reliable, and has high control precision.
The cutting machine equipment lifting device is the preferred product. Our company uses a decelerated DC motor to control the lifting body to drive the cutting torch up and down. Among them, the key parts that affect the cutting accuracy of the whole machine support the CNC plasma cutting positioning function. The internal lifting transmission of the elevator adopts 304 stainless steel T-shaped screw, and both ends use optical shafts and linear sliders to ensure stable and reliable vertical operation in the vertical direction. Simple description: used for the ascending and descending transmission mechanism of plasma cutting; used as a whole The aluminum material is refined by a machining center with very high accuracy. The positioning switch and limit switch use Taiwan original HIGHLY
F1621 Description: Features:
Two initial positioning methods
1. Proximity switch positioning
2. Protective cap positioning
Automatic rise protection torch
1. After hitting the gun, the gun will rise automatically
2. After the cutting is completed, the gun will rise automatically
Arc voltage monitoring
Double arc pressure display, convenient for users to monitor the height in cutting in real time.
Dynamic perforation
Instantly pierce and raise the torch. Protect the torch from splashing injuries.
Automatic arc voltage height control
During cutting, the height of the steel plate is automatically tracked, and the torch and the steel plate are always maintained at a fixed height to ensure the cutting quality.
Multiple operation modes
1.Automatic operation
2.Manual operation
Arc voltage intelligent adjustment
After multiple collisions, the set arc voltage is automatically increased
Collision feedback
Immediately after a collision, the collision signal is fed back to the control system.
PRODUCT PARAMETERS
Working voltage: DC24 ¡¾ 10%, 60W
Lifting motor: DC24V DC motor, 45W
Drive mode: PWM stepless speed regulation, H-bridge MOS drive
Working temperature: 0-50 ¡É
Positioning method: protective cap positioning or proximity switch positioning
Arc voltage range: 0V-600V
Sampling accuracy: 0.2V
Control accuracy: 0.5V
Partial pressure ratio: 100: 1
Lifting speed: 8000MM / MIN
Sensitivity: adjustable through parameters
Protection: overload protection
Over temperature protection
Short circuit protection
Under voltage protection
Power supply anti-reverse protection
|
|
|
|
|