|
aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ½Åû: ¹Ð¸µ ¸Ó½Å
- ¸ðµ¨ ¹øÈ£: mach3 card
- ¿ø»êÁö: Áß±¹
4 axis USB mach3 controller board Description: 1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives; 2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor; 3. Support automatic probe tool 4. Support Emergency input 5. Support for limit switch 6. Support for connecting electronic handwheel 7. Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable 8. Have 0-10V output port, you can use mach3 software to control the spindle motor speed. 9. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device 10. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device 11. 1 status LED, indicate connection status on the board
Size: 8x7.7cm/3.15x3.03inch Quantity: 1 Set Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Contents: 1 x 4 axis USB CNC Controller Card 1 x USB cable 1 x CD
5 axis USB mach3 controller board 1. Support for 5-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;
3. 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop switch, auto tool zero, home switch etc. 4. Support for connecting electronic handwheel;
5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.
6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device;
7. 1 status LED, indicate connection status on the board. Package Contents: 1 x 5 axis USB CNC Controller Card 1 x USB cable 1 x CD 5 axis DB25 mach3 controller board Features:
1. Full support for MACH3 and other computer software supporting parallel port control. 2, USB power supply and peripheral power supply are separated to ensure computer security. 3. External wide voltage input, 12-24V, and anti-reverse connection function. 4. All input signals are isolated by optical fiber, which can be connected to emergency stop, tool setting, limit, etc. to ensure computer safety. 5. One relay output port can control the spindle switch. The output is P17. 6. A 0-10V analog voltage output isolated by the optocoupler can control the inverter with the corresponding analog interface and the spindle speed. The output is P1. 7, open all 17 ports, can be connected to the driver with optocoupler, can control 5-axis stepper motor. 8. P1 is used as PWM output, which can control the spindle governor with optocoupler input. 9, can be connected to the common negative or common driver, the input level is 5V driver. 10. Print all port names at a glance.
Package Contents: 1 x 5 axis DB25 CNC Controller Card 1 x USB cable 1 x DB25 cable
|
|
|
|
|