Packing list:
1 x engraving machine system control card
1x breakout board
1x cable
1xWireless remote WHB02
1xUSB
Notice:
This product is not produced by Weihong Company, and the original PM53C has been discontinued. But they have the same function. Please confirm when purchasing.
CNC specification standard:
Number of Axes Supported three axes
Rotary Axes X/Y as a rotary axis(optional)
Control Signals:
Plus Frequency 160KHZ
Control Mode Position control
Control Signal Type Differential signals
Position Signal Type Pulse+Direction
Communication Mode:
PCI
Spindle:
Analog Voltage Output 0-10V
Tool Management:
Tool Measurement Mode Auto measurement,
Manual
measurement
Tool Calibration Type Fixed calibration,
Mobile calibration,
First calibration &
Calibration after tool
change
Compensation:
Compensation Type: Screw error
compensation, Backlash
compensation, AQE
compensation, Tool
compensation
Toolpath Program:
Supported File Format
*.g;*.nc;*.ug;*.demo;*.iso;*.eng;*.cut;*.dxf;*.plt;*.txt
Operations:
WCS Setting
Supporting WCS G54-G59 and Work Zero saving
Processing Technology
Array function,Mirror&rotate,Cycle
Convenitent Operation
Handwheel guide,Breakpoint resurne,Tool selection
High-speed High-precision Optimization:
Interpolation Algorithms
T-type, S-type and LEP algorithms
Software Language:
Chinese,English
Reliability & Safety
CNC Software Alarm
Alarms of program error, operation error, over-travel error, PLC error and IO communication error
Support system: ncstudio5x, ncstudio8x
Characteristics:
1. Supports 3-axis position adjustment
2. With the start of processing, stop and processing of axis open stop functions
3. Barrier-free transmission distance: 60 meters
4. Support the same room, 64 sets of remote control simultaneously, no interference
5. The use of low power design, 2 AAA batteries, can use six months
Operation principle:
Traditional engraving machine, you need to work for engraving machine with computer, worker need to cooperate between engraving machine and computer. Inefficiency and work operation are not convenient. And WHB02 wireless controller, which is equivalent to a laptop computer for the operator, standing directly on the front engraving machine, the engraving machine can operate normally and bring great convenience to work.