packing list:
1 xCNC controller DDCSV2.1 has 3/4 axis optional
1 x handwheel
2 x fixed terminal VDC
1 x U Disk
1 x U disk extension cable
Product introduction:
¡ßThe DDCSV2.1 is the 4 axis and 4 axes motion controller which has been researched
¡ßand developed by Faster CNC for four years. The control period of each position is only 4
¡ßmilliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and
¡ßthe pulse width can be adjusted. It supports the common stepper motor and servo motor.
¡ßThe DDCSV2.1 numerical control system adopts the ARM+FPGA design framework.
¡ßThe ARM can finish the part of human-computer interface and code analysis and the FPGA can
¡ßfinish the part of underlying algorithm and control pulse generate, with the reasonable design,
¡ßreliable control and easy operation.
¡ßThe panel layout structure of DDCSV2.1 is rational. The common off-line operation
¡ßcan be finished only by 17 keys and it supports the FANUC with high universality to be
¡ßcompatible with G code set.
¡ßProduct performance parameters:
¡ßOrdinary digital input interface of 16-circuitoptocoupler coupling isolation
¡ßOrdinary digital input interface of 3-circuit optocoupler coupling isolation
¡ßOutput interface of 0-10V spindle control port with analog quantity(can be
¡ßmodified as PWM output);
¡ßSupport the 4 axis stepper motor control, the highest control pulse output of
¡ßsingle axis is 500KHz;
¡ßARM9 main control chip;
¡ßFPGA core algorithm chip;
¡ß4.3 inches TFT screen, resolution ratio£º480*272£»
¡ß17 operational keys£»
¡ßThe main control equipment is 18V-32V power input, the current capacity is
Master page:
The software interface totally contains 3 pages, including main page, file page and
configuration page. Now the 3 pages are described as follows