Introduction:
The control system is a professional three-axis motion controller based on an embedded platform, which can run independently without a PC. Using embedded operating system, computer viruses can be avoided. In order to achieve higher processing efficiency and high-quality processing surfaces, advanced adaptive motion speed and spline interpolation motion control algorithms are used in the system. User operation, learning and understanding are very easy. Moreover, it is easy to install and takes up little space. The system can be applied to various engraving machines, engraving milling machines and cutting machines.
Installation Environment:
¡ßSturdy ground;
void avoid direct sunlight;
ave set aside some maintenance space;
¡ßSpace temperature: 5¡É to 40¡É;
¡ßRelative humidity: 30%~95%RH;
the install the equipment horizontally;
ell is well ventilated.
Notes£º
Do not use this product under strong interference and strong magnetic field environment;
¡ßDo not insert the cable into the control box and unplug it when the power is on;
Pay attention to waterproof, dustproof and fireproof;
¡ßRemove the conductive material (such as metal) from the inner shell,
As does not allow unauthorized disassembly, because any internal components should not be repaired by the operator;
U plug U disk and other moderate strength wires;
the When the controller is not used for a long time, please cut off the power and keep it properly.
¡ßIn case of injury, do not touch the carving knife with your hands. Do not touch them with handkerchiefs or silk scarves to avoid injury or equipment damage;
Cut off the power when overhauling the machine;
Operators and soldiers should receive good training.
System function£º
with is compatible with standard G code, PLT and Eng data formats. Support mainstream CAD/CAM software, such as ArtCam, MasterCam, ProE, etc., as well as the data generated by the entire series from ENG5.18 to ENG5.50;
¡ßMaximum number of controlled axes: three times; supports dual/three-axis linear interpolation and dual-axis arc interpolation;
opt adopts three-axis spline interpolation function to fit and interpolate small lines under spline conditions to improve the surface quality;
Per operator can realize the interaction between external files and the system through the U disk, without the need for a network;
¡ßPreprocess multiple production lines, and perform advanced adaptive adaptive advanced speed control on the processing path to achieve fast, high precision and continuity;
Small high-speed and constant small-line processing and automatic selection of the most efficient one among various small-line control algorithms;
¡ßThe standard 4G data storage space can be expanded to 32G at most, supporting large-capacity program files;
¡ßManual, automatic processing function;
Lock skips the program execution function: processing according to the designated processing line;
¡ßWith breakpoint memory and automatic power-off protection functions;
¡ßMechanical fault diagnosis and system log;
Tool automatic tool setting function;
¡ßWith automatic return to origin, tool setting function
¡ßBuilt-in program file editing manager: you can check files with standard G code below 5M;
Maximum pulse output frequency: 500KHZ;
¡ßAcceleration and deceleration mode: support linear and S-curve acceleration and deceleration.