|
|
1 Pcs 2.2kw er20 4 bearings water cooled spindle ( blue or silver color) |
|
1 pcs 2.2kw inverter (YL620-A) or(HY) |
|
1 pcs 75w/80w water pump |
|
1 pcs 5 meter water pipe |
|
1 pcs 80mm spindle clamp (3 or 4 mounting scew£¬No remarks are 4 screws) |
|
1 kit er20 collect (¡Â0.008mm) (1-11mm + 3.175mm + 6.35mm ) |
|
1. 0-24000rpm ultra-high speed |
|
2. Four high-quality bearings |
|
3. Run Silent |
|
4. High temperature resistance |
|
5.Long life |
|
¨ç ER20 Collect |
¨è Spindle Rotor |
¨é Spindle Dustproof Cover |
¨êSpindle Rotation Direction |
¨ëSpindle Name Plate |
¨ìSteel Shell |
Model |
Current |
Phase |
Lubricate |
Collect |
Bearing Type |
2.2KW Water Spindle |
10A |
3 |
Grease |
ER20 |
Voltage |
Diameter |
Frequency |
Speed |
Colling |
2*7005 P4 DT |
220V |
80mm |
0-400Hz |
0-24000rpm |
Water Cooling |
2*7002 P4 DT |
Icon |
Features |
Explanation |
¨ç |
Power-on Run key |
Power-on Self-test,display frequency. |
¨è |
Programming key |
Enterprogramming,exit programming. |
¨é |
Jog key |
Jog key,can be used to move display focus when set -ting parameters. |
¨ê |
Up button |
Uparrow key for parameter modification,page turn -ing,uploading.Modify the Value. |
¨ë |
Down button |
Down arrow key for parameter modification,page turning, and down. |
¨ì |
Data Function key |
Enter the parameter value setting state and save the modified parameter value. |
¨í |
Forward and reverse switch |
Switch between positive and negative during operation |
¨î |
Speed control button |
Adjust the running speed. |
¨ï |
Stop reset button |
Stop running motor |
Tech Parameters |
Power:2.2kw |
Input Voltage:220v |
Input Frequency:50/60Hz |
Input Phase:1 Phase |
Output Current:10A |
Output Phase: 3Phase |
Output Voltage:110/220/380V |
Output Frequency:400Hz |
Cooling Method:V/F control£»Open-loop Flux Vector Control |
The factory default setting of YL inverter is 400hz, no need to set it , it is suitable for our spindle motor.
INVERTER SETTING SHCEME |
PD013=8 |
Restore factory setting |
PD005=400 |
Set max operating frequency |
PD004=400 |
Set base frequency |
PD002=1 |
Set board potentiometer control |
PD070=1 |
Set analoy input |
PD072=400 |
Set high analoy frequency |
Maxinum Flow |
Max Head |
Voltage |
Outlet Size |
3500L/H |
3.5M |
220V |
4 and 6mm |
Plug Cord Length |
Power |
Frequency |
Diameter |
1.5m |
80w |
50Hz |
140*75*118mm |
CHUCK REPLEACEMENT
|
Wood Carving |
Soft Metal Engraving |
Aluminum Alloy Carving |
|
Milling Cutter |
|
|
|
1:The spindle has been running for a period of time and the temperature is very high. Is it normal? What is the working environment temperature range?
Answer:Mechanical products have very good heat resistance. The surface is normal within 150°c, and the suitable working environment temperature is -10°c ~ +50°c
2: Application of air-cooled spindle
Answer:This air-cooled spindle is suitable for woodworking, aluminum and some soft metals, and can be used with a variety of milling cutters
3:Number and material of bearings
Answer:4 steel ball bearings, model C7002
4:Continuous working time
Answer:If the ambient temperature is in the normal range and the surface temperature of the spindle is within 150 degrees, it can work continuously without interruption.
5: Can the spindle run vulgarly?
Answer: Yes, the maximum speed of this spindle is 0-24000rpm, which is all possible within this range
6:Abnormal sound
Answer:If there are abnormal noises, most of them are bearing problems, because the bearing has a service life and is vulnerable to damage. According to different frequency and intensity of use, the bearing needs to be replaced after 0.5 to 1 year.