aHR0cDovL2ZyZWVzaGlwLmNvLmty![](https://ae01.alicdn.com/kf/S06f9c729622e4706a39877dda04dfc0eL/ZCC-CT-100-Original-TNMX-TNMX15-TNMX1509-2-YBC251-YBC252-Gravity-Peeling-Turning-Blade-Tools.jpeg)
![](https://ae01.alicdn.com/kf/Sce1be17870a048989269bade731ee524K.png)
Description of mainmaterials-ZCC Turning Blade
CVD
YBC151?- Matrix with high wear resistance and MT TiCN, thickCombination of Al2O3 and TiN coatings; Suitable for steelFinishing of materials.
YBC152?-- Thick TiCN and thick Al2O3 coatings can improve the impact toughness andwear resistanceThe performance has been greatly improved. It is a high-speed cutting process from steel finishing to semi finishingIdeal. The cutting speed can be increasedby more than 25%; At the same cutting speedThe tool life can be increased to more than 30% under 50 ¡É.
YBC251?-- Excellent combination of toughness matrix with good edge safety and MT TiCN, thick Al2O3, TiN coatingCombined; Suitable for semi finishing of steel.
YBC252?-- Thick TiCN and Al2O3 coatings are used, which have strong plasticdeformation resistanceAnd cutting edge strength, which is the general preferred brandfor steel from finishing to rough machiningnumber. There is a stability table under highremoval rate cutting parameters or bad working conditionsNow, more green andenvironment-friendly dry cutting can be realized. On the same cutting stripThe cuttingspeed can be increased by more than 25%; At the same cutting speed,The tool life can be increased by more than 30%.
YBC352?-- With thick TiCN and thick Al2O3 coating, it has super toughness and plasticresistanceDeformation performance, is the ideal grade of high efficiency roughmachining steel under severe working conditions.
YBD052?-- CVD coating brand, (ultra thick Al2O3+thick TiCN) coating is combined with hard substrate, with smooth surface and ultra-fine grains. It shows excellent wear resistance in dry high-speed cutting of gray cast iron.
YBD102?-- CVD coating grade, (thick Al2O3+thick TiCN) coating is combined with hard substrate, which shows good wear resistance and impact resistance during high-speed machining of ductile iron.
YBD152?-- CVD coating brand, (medium thickness Al2O3+thick TiCN) coating is combined with hard substrate, with good peeling resistance. It is suitable for medium high speed turning of cast iron, and can withstand slight intermittent cutting at medium speed. This grade is also widely used in milling of cast iron.
YBD252?-- CVD coating brand, (medium thickness Al2O3+thick TiCN) coating is combined with hard substrate, with good wear resistance and toughness. It is suitable for medium and low speed wet milling of cast iron (such as nodular cast iron) with toughness requirements, as well as turning under intermittent conditions.
YBM151?-- Matrix with special structure and TiCN, thin Al2O3, TiN coatingLayer bonding, with good diffusion abrasion resistance and plastic resistanceIt has good deformability and impact resistance, and is suitable forIn finishing, semi finishing and rough machining of stainless steel.
YBM251- Matrix with good toughness and strength and TiCN, thin Al2O3, TiNCoating combination, suitable for semi finishing and rough processing of stainless steelWorkers.
YBC351?-- The combination of high strength and plastic deformation resistant matrix with MT TiCN, thick Al2O3, TiN coating;Good toughness and plastic deformationresistance, suitable forIn the rough processing of steel.
YBM153?-- Suitable for cutting efficiency requirementsHigh speed semi finish and finish turning of stainless steel with stable cutting conditionsProcessing occasions. For example, medium-sized fluid valve department in petrochemical industryParts, automobile pipe flanges and other partsValve body, marine parts, aviation hydraulic parts, IT semiconductorIndustrial connectors, food processing machinery, engineeringmachinery, generalMechanical medium and long shaft parts.
YBM253?-- It is applicable to the working condition with high impact and high feed depth
The rough machining field of large stainless steel parts.
![](https://ae01.alicdn.com/kf/S5bba1385b4814bdd94ada0e74a98d54b7.png)
PVD
YBG102 -- Nc TiAlN coating is combined with fine particle matrix, which is suitable forfinishing of various materials and high temperatureFine and semi fine turning of alloy.
YBG202 -- The nc TiAlN coating is combined with the strong and tough matrix ofultra-fine particles, which is suitable for all kinds of processingFine and semi fine turning of materials and rough turning of superalloys.
YBG302-- The nc TiAlN coating is combined with the ductile cemented carbide matrix,and is applicable to all kinds of processed materialsThe cutting and grooving process ofthe material realizes the perfect combination of safety and wear resistance.
YBG105-- Grade of PVD coating for finishing and semi finishing of difficult to machine materials.PVD coating brand, new TiAlN based multi-component coating, with higher wear resistance And high temperature oxidation resistance. Suitable for all kinds of high-temperature alloys, heat-resistant alloys and other difficult to process materials Fine and semi fine turning of materials.
YBG205-- Stainless steel finish PVD coating grade.Suitable for processing with relatively small workpieces and high requirements for surface finish Domain.Ultrafine TiAlN based nano coating with wear-resistant and high-temperature resistant elements, high coating hardness And excellent high temperature resistance provide effective protection for cutting edges, special coating treatment Technology, coating and substrate combine more firmly, suitable for precision turning of stainless steel materials.
YBG212-- The nc TiAlN coating is combined with the strong and tough matrix ofultrafine particles, which is suitable for difficult to machine materialsFinish, semi finish and rough turning
YBS103-- Turning grade of S-type Ni base difficult to machine materials.Good wear resistance, adhesive wear resistance and high temperature oxidation resistance, suitable for nickel base Turning of superalloys.
YBM215-- Nano multilayer PVD coating grade.It can significantly improve the wear resistance and high temperature resistance of the coating, and the gradient transition layer technology can effectively improve the Improve the stress state and interface state of the coating, reduce the stress concentration, and improve the resistance between the coating and the substrate It is suitable for turning stainless steel materials because of its strength and stability.
![](https://ae01.alicdn.com/kf/Se40d3eb158044d3fab2e66a18182ff8aU.png)
Cermet (YNG151)/Coating cermet(YNG151C)
Ti (CN) based ceramic tools have high chemical stability with the materials to be machined. The friction in the cutting process is small, which can reduce the temperature of the cutting edge, thus effectively preventing the tool With the mutual diffusion of atoms between the workpiece and the workpiece material, the adhesive wear resistance is significantly improved. Therefore, under the condition of high-speed cutting, Ti (CN) based ceramic alloys show good red hardness It is an ideal tool material for high-speed machining and semi finishing of steel. Its high temperature strength is higher than that of WC Co cemented carbide, while its toughness is higher than that of WC Co cemented carbide Al2O3 and Si3N4 ceramic tools are good, filling the gap between WC based cemented carbide and Al2O3 and Si3N4 ceramics in the field of high-speed finishing and semi finishing.
![](https://ae01.alicdn.com/kf/S568ea74129f44a9fb9365d7f00aee6e6B.png)
Non coated cemented carbide(YD101/YD201)
Non coated cemented carbide grades are widely used in nonferrous metals and superalloys And other materials processing, showing universality and economy in the application field.
![](https://ae01.alicdn.com/kf/Sdc995e5b8d8e4821a8fb279017ee8d17M.png)
Polycrystalline cubic boron nitride PCBN
YCB012-- High hardness materials.Low CBN content, high wear resistance and thermal stability, suitable for continuous light intermittent cutting hardened steel.
YCB011-- cast iron,High CBN content, high wear resistance and strength, suitable for cutting cast iron materials, and strong intermittent cutting quenchingHard steel.
YzB221-- cast iron,High CBN content, high wear resistance and impact resistance, good versatility, suitable for cutting cast iron materials.
![](https://ae01.alicdn.com/kf/Saa88908db21e4bbf92ee10a819f7f546I.png)
Polycrystalline diamond PCD(YCD011)
PCD has high hardness, excellent wear resistance and thermal conductivity, and low friction coefficient. ForNon ferrous metals and their alloys (such as Cu, Al, Mg, etc.), non-metallic materials and compositesCutting of materials (such as MMC, ceramics, reinforced plastics, etc.).
![](https://ae01.alicdn.com/kf/S71e61b7653204ba48c8fb603d9589995p.png)
Nonmetallic ceramics£¨CN3100£©
Scope of application: It has excellent wear resistance, fracture toughness, and thermal shock resistance, and can be used in general
Machining to finishing. Compared with SiC/Al2O3 whisker ceramic material, it has better performance of resistance to damage in the cutting depth.
![](https://ae01.alicdn.com/kf/S09c67032314c4305bcd4c382ddcafdf6O.jpg)
![](https://ae01.alicdn.com/kf/S06f9c729622e4706a39877dda04dfc0eL.jpeg)