12V 6A Thermoelectric Cooler Peltier Module 40*40MM Semiconductor Refrigerator DIY Refrigeration Slice Cooler Peltier TEC1-12706
1. A radiator or a water cooling device must be installed on the heat dissipation surface, otherwise it will burn out. (Note: Whether it is water cooling or air cooling, thermal grease must be applied)
2. If the cooling sheet is burnt out due to the heat dissipation is not done well, our shop is not responsible for the warranty. The cooling effect will be achieved when the power is turned on when testing without heat dissipation. The power should be unplugged immediately within 1 second. Otherwise, it is easy to burn out the cooling film.
3.The one with text is refrigeration£¬there is no text is heat dissipation.
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
These devices must be used in conjunction with a heat sink to avoid burned Each device is full inspected and tested fitted with 6-inch insulated leads.
Chip model: TEC1-12706
Dimensions: 40+40*3.6mm±0.25 Element pairs 127 pairs
Maximum voltage: 15.8V
Maximum current: 6A
Recommended voltage: 12V
Maximum temperature difference: 60¡É
Maximum cooling capacity: 48W
Assembly pressure: 85N/cm2
Working environment: temperature range -55¡É~85¡É (excessive ambient temperature will directly affect the cooling efficiency)
Encapsulation process: 704 silicone rubber seal or epoxy resin seal around, storage conditions ambient temperature -10 ¡É ~ 40 ¡É
Thermoelectric Cooler Peltier *1 Pcs£¨only 1pcs£©