It has DI function Box simulation function, microphone placement position, box material adjustment, front level function and three section equalization Sound source input function, headphone output function, dry and wet signal output function, dry and wet signal loop function and other integrated bass audio workstation
With this equipment, brothers can record sound with sound card or perform in sound station Or improve our bass`s voice and dynamics!!!
Describe the functions and features of this device
First of all, the IUPUT device is divided into active and passive pickups. There is a gear that can be switched. Then the OUT output part is 6.35 and DI OUT wet signal output and DI PARALLEL dry signal output. These two signals are very important in recording, The 6.35 output is a mix ratio output (the mix ratio here is the dry and wet signal). There is a gear shift below 6.35 to realize the direct switch or enter our output. In short, it is a ByPASS
Then the panel PREAMP/BLEND knob is used to control the mixing ratio of the dry signal and the signal entering the previous stage. When the control is turned on to the minimum, the dry signal is turned on to the maximum, and the wet signal is turned on
As for the front stage, I will not say much about the volume gain, medium frequency, low frequency and high frequency. Here, the three segments of equalization increase 15DB and attenuate 15DB respectively
On the IF, there is a frequency band of 400HZ 900HZ 1.5KHZ, but the IF knob cannot be turned to 0DB
Then talk about the function of the box, microphone and material
On the panel, CABSIM BLEND is the mixing ratio control of the box part and the part that does not go through the box simulation. When the knob is turned to the minimum, the signal does not go through the box simulation and reaches the maximum, it goes through the box simulation
Then the box part is selected as 4x10 1x15 8x10
CAB SIZE The material of the knob box is from transparent to warm
And then speaker COLOR, which is the microphone placement position, and the gear below this knob is the feature of voice selection
The loop is divided into dry signal loop and wet signal loop. PARALLEL FX is the dry signal loop. PREAMP is the wet signal loop