|
aHR0cDovL2ZyZWVzaGlwLmNvLmty¿É¼ÇÁ¤º¸[(496)º¸¶ó»ö][(350852)ÁÖȲ»ö]
Description:
Features: High Compatibility: Most of the common remote control can be copied, the
operation is simple, and it can be used immediately after copying. Good Hand Feel: Frosted design rubber buttons, crisp feel and clear feedback. Slim and compact size, easy to carry. Indicator Light: Built-in high brightness LED lamp beads, the working status is clear at a glance. Wide Adaptability: It can be used in e-scooter, garage doors, gate access control, and auto parts modification fields. Precondition:
The original remote control's functionality is normal, its chip is
identical or compatible, and its working frequency is the same.
How to deal with the situation where some of the keys can control, the
rest cannot control? You can use clear and restore operation, the
specific operation is as follows: (1) first clear code; (2) after clearing code, copy the unsuccessful key again, and there is no need to copy the rest buttons; (3) and then clear the code again; (4)
restore code; at this time, the original keys that were not
successfully copied are now covered by new codes, and the original keys
that were successfully copied are now retained. If there is no copy
after the second copy of the keys, repeat the above steps again and
again until all keys are successfully copied.
Tips: 1. The
remote control can only copy the fixed code, learn the code chip and
part of the single-chip remote control (can copy the chip model see
copyable chip type). 2. Two-way remote control, rolling code remote
control, single-chip encryption program remote control cannot be copied.
Such as HCS200, HCS201, HCS300, HCS301 and so on. 3. Before copying
the remote control, make sure that the existing code on the remote
control has been cleared and check that the code is cleared
successfully. Otherwise, it cannot be copied. 4. Please ensure that your remote control has enough power, the distance between the two remote control the better. 5.
If the copy distance is too close to the switch at different angles to
copy. Press and hold the button on the original remote control to send
the signal completely normal, and then press the button on the remote
control to ensure that the function is completely copied.
Copyable chip 2260 (PT2260, SC2260, LX2260, HX2260); 2262, (PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240), 1527 (EV1527, HS1527, HX1527), FP52626-3AX58AX -4, HT6HT600, HT6180, 6, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, etc. Different chip manufacturers have different prefix chip model numbers, as long as the digital part of the chip is the same model number. Notice: Actual color may be slightly different from the image due to different display and light effect. Please allow 1-3cm deviation due to manual measurement. If you're not sure what chip it is, you can turn on the remote and send us the photo. We will contact our technicians to check if it can be reproduced. Description:
Size: 62*34*15mm Transmit power: 3 to 6dBm Operating frequency: 315/433.99MHz Shell material: ABS Emission current: ¡Â21mA Working voltage: DC3V Modulation method: ASK Quiescent current: <0.15uA Battery type: button battery (included) Product weight: 20.5g Color/Style: As the picture shown
Package Includes:
1 x Duplicator Remote
|
|
|
|
|