Hormann Ecostar RSE2 and Ecostar RSC2 Garage Door Opener 433Mhz Rolling Code
Brand new
modern, stylish, compact design which fits perfectly in your pocket.
The new design includes a sliding cover, preventing buttons being pressed accidently.
Features
LED Indicator
Sliding cover
Compact pocket sized
Dimensions: 7x 2.5 x 1cm(L X W X H)
Included key ring and Battery
100% Compatible Hormann EcoStar
Hormann EcoStar RSE2
Hormann EcoStar RSC2
Programming / Learning Instructions
1. Press the LEARN button or the transparent button located under the ECOSTAR motor. The LED light on the motor blinks slowly. Let the button go.
2. During the next 10 seconds, press a desired button on your new remote control.
3. The LED light on the motor blinks faster. Let the button go.
4. Press the same button again on your new remote control. Keep it pressed down.
5. The LED light on the motor blinks very fast. Let the button go.
6. Your new remote control is programmed.
ATTENTION : You can program only 6 RSE2 remote controls with the ECOSTAR motor
To erase all your remote controls:
1. Press the transparent button P located under the ECOSTAR motor. Keep it pressed down. 2. Wait 5 seconds. Let the button go. 3. The LED light on the receiver blinks slowly for 1 second, then faster for 4 seconds and then very fast for 2 seconds. 4. All the remote controls are erased.
Compatible with the following EcoStar garage door operator models:
Ecostar Liftronic 500, 700, 800 and Portronic D5000, S4000, D2500
If you have any doubts, you can contact customer service to communicate and answer.