10PCS Hormann ECOSTAR RSC2 RSE2 Liftronic 500 700 800 Remote Control 433MHz Rolling Code Garage Door Opener
Shipped within 24 hours (except holidays)
Description:
1.Type of programming: Programming with the receiver
2.Number of channels: 4
3. Code: rolling code
4. Frequency: 433.92mhz
5.Woring Range: 10-50 m (open space)
6.Power supply: CR2032
7.Remote come with Battery !!!
8.Modulation Mode: ASK (AM)
9.The transmission power: ¡Â 100mW
10.The working temperature: -20 ¡Æ C to +50 ¡Æ C
Security of use: dynamic code provides a high level of security, non-copyable code.
Disclaimer:Your Old remote must be same as the advertisement , new remote do not compatible with other remotes .
Include:
10xRemote Control
10xBattery
10xClip
1xEnglish Manual
How to Program
You have to press a button on the receiver (under the motor cover or next to the motor in a separate box), and then press a button on the new remote to register it. Materials required for programming: your receiver!
1. Open your receiver from the garage door.
2. Press the programming button. Inscription is usually: ENR, MEMO or PROG.
3. On some receivers, it is necessary to hold down the programming button.
4. On the receiver the LED indicates the start of the programming mode.
5. Press for one second on a button on the new remote control and let it go again.
6. The LED of the receiver will light differently or goes out to indicate a successful programming.
7. Wait a few seconds to exit the programming mode. Congratulations! Your new remote control is programmed!