Chamberlain Motorlift Liftmaster Merlin 433.92MHz Garage Door Remote Control
1. Important: Only suitable for drives built after October 2006!
The date of manufacture can be found on the type plate on the drive (e.g. 03/02/10 indicates February 2010)
2. Not compatible with 4335e, 4330e, 4333e etc
3. Not compatible with EV series
Description
1. Model : YNG120
2.Type of programming: Programming with the receiver
3.Buttons : 3 Buttons
4.Code: Rolling Code
5. Frequency: 433.92MHz
6.Battery : Include Battery
7.Woring Range : 30-120 m (open space)
Compatible Models
Chamberlain, Liftmaster, Motorlift£º
84330E£¬84333E£¬84335E£¬8747E£¬84330EML£¬84333EML£¬84335EML£¬8747EML¡£
94330E£¬94333E£¬94334E£¬94335E£¬9747E£¬94330EML£¬94333EML£¬94335EML£¬94330EWK£¬94334CE£¬94334HD£¬1A5639-7, 1A5477, 1A6487, 1A5478, 132B2372, D-66793, WICKES156105, GC844, CG844,001A6518, 1A6518, PS94331
GRIFCO
GC844, CG844
Homentry
001A6518, 1A6518, PS94331
Chamberlain Liftmaster, Garador Autodor, Catnic Autodor, Wickes, Motorlift and Screwfix
MotorLift 500, ML500
MotorLift 700, ML700
MotorLift 750, ML750
MotorLift 850, ML850
Motorlift HC260ML (HC-260 ML), HC280 (HC-280), HC100ML (HC-100 ML)
MotorLift HC300ML (HC-300 ML)
MotorLift HC400ML (HC-300 ML)
MotorLift HC500ML (HC-300 ML)
MotorLift HC600ML (HC-600 ML)
MotorLift LM600, LM-600, LM600A, LM-600A, LM800, LM-800, LM800A, LM-800A, LM1000, LM-1000, LM1000A, LM-1000A
Power Drive
GPD60, GPD65, GPD 80, TPD10, TPD500
MERLIN
Merlin HE60, MGA600, MGL300, MGL400, MGS500, MGS500T, MGS000
Merlin MGS 1000T, MJ3800, MJ3800R, ML500, ML700
Merlin MLR70, MLR850, MR60, MR60, MR600A, MR650,
Merlin MR800, MR800A, MR850, MR1000, MT60, MT60P
Merlin MT230, MT600, MT800, MT1000, MT3850, MT5580, MT5580P
Merlin C840, C940, C943, C945, CM842, CM844, CM128
Include
Remote Control
Include Battery
English Manual
Keychain
How to program ?
1) Press the programming button on your motor. The LED will go on.
2) Press desired button on the new remote control.
3) The opener light will flash, confirming successful programming. Now the opener will operate when the remote control push button is pressed.
To erase all codes from the receiver, hold the receiver's Learn button until the indicator light goes off (after 6 seconds). All codes that the receiver has learned will be erased.