For replacing old garage control systems, or for adding more remotes to control garage doors
Newest Tuya WiFi Universal Multi requency 300-868mhz Garage Door Receive
Specifications:
1)Name: Tuya WiFi Universal Garage Receiver
2)Operating Voltage: 9-30V 85-250V
3)Channel: 2.
4)Frequency: 300MHz - 900MHz.
5) Distance: 30-50 meters.
6) Very mini size: 5.5cm*4.5cm*2.0cm.
7) It don¡¯t interference other remotes and receivers.
8) Brand selector: With ?8 ?bits ?dip ?switch,the user ? can ? make ? difference combination ? for ? differents remote ? brands. ? The ? brands selection ?show ?as below?table.
9)Code: Rolling and Fixed code & Learning code.
10)Uses: Receiver is designed to control any gate automation system, burglar alarm system, electric doors, windows, lifting equipment, gateways, lifting devices. This is an easy to use, good looking, low power consumption and is easy to connect to your existing system.
11) Power Input Selector: This receiver can work at AC/DC 9V~30V. However, it¡¯s better to change the PIS according to the power input. If the input is great than 24V, shorten pin 2&3; shorten 1&2 if input less than 24V.
Working frequency: 300-900MHz(Rolling code & Fixed code)
300MHz
310MHz
315MHz
318MHz
390MHz
433.4MHz
433MHz
433.92MHz
868MHz
868.3MHz
868.8MHz
Can identify ALL Fixed code (2262, 2260, 2264, 5326, M1E, M5E and so on). All Learning code (1527, 2240, 6P20B, 6P20D and so on), Rolling code (HCS301, HCS300,HCS200, HCS201, HCS100, HCS101),
Note
Checklist before using the device
Your smart phone or tablet has connected to a2.4g WiFi with internet.
You need to enable Bluetooth of the phone.You have the correct WiFi PWD.
You have the correct WiFi PWD.
You smart phone or tablet must have access to APPstore,Google play.
Your router is MAC-open
User Guide
1.You can download the App by searching
¡°Tuya Smart¡±in mobile app stores.
2.Register an Tuya Smart account.
3.If you have Tuya Smart acconunt. just login.
4.Power on.
ON/OFF operating principle:
The connected appliances work/stop through
live wire power on/of
5.There is the Wifi programming button at the back side of the receiver.
Find a small pin to hold and press it about 5-10 sencods, Connect the Tuay app while the blue led fast flash.
Programming procedure for remote control:
1. First, select the correct brand for remote that will be entry (by dip switch).
2. Press the learn button, LED turns on. Press the button on the remote, the LED S1/S2
flashes 4 times, this remote button entry into the RX-MULTI successfully.
3. Repeat step 2 for another button.
4. Both channels work the same.
Remote control delete code
Pressing and holding either learn button, ?the LED start flash. Keep pressing this
button until the LED turn off. ?All data in the memory card will be erased permanently.
Notice: ?Be ?carefully ?for ?erasing ?all ?data ?in ?the ?memory ?card. ?The ?data ?will ?be ?erased
permanently ?and ?cannot ?be ?recovered.