Specifications
Item condition - New
Third party remote control. Not made by SEAV
Decoder IC - Rolling Code.
Frequency - 433.92MHz.
Operating voltage - 12V DC 27A (Free battery included)
Transmit distance - 25-50m in open space. Open space means no any interference. No walls, no doors, no trees or any other obstructions. Interference like garage door or brick wall can reduce remote control range significantly.
Compatible with:
Access to receiver required. Please make sure you got access to your receiver/opener before purchase.
Copy method
Step 1 -delete the existing code of our remote duplicator
1)Click and Hold Lock(A) and Unlock(B) buttons together - Led will flash 3 times
2)Keep holding lock (A)button and release unlock(B) button
3)Keep holding lock(A) button and push unlock (B)button 3 times, Led will start flashing Non-stop
Step 2 - clone your original remote
1)Put both remotes Into back to Back position. Make sure they have direct contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)
If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.
Step 3. Resume the previous code of our remote duplicator
If you carelessly delete the code of remote duplicator, how to do get the memory?
Just follow the bellows :
Press keys C (light) and D(mute) at the same time, until the LED keeps flashing quickly.
Note: 2-key remote duplicator does not have this function.
Note:Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code.