Support, we have cooperated with many friends, our packaging will not reveal any information, and the chip will not print text, we only provide products and instructions for use
We are the seller with the fastest delivery on the platform. When we receive your order, we will send your package within 12 hours.
For DOORHAN TRANSMITTER 2 4 PRO Remote Control 433MHz Dynamic Code
NOTE---NOTE---NOTE
Note: It is not compatible with other brands, it only compatible with DOORHAN brand
Specifications
1.How to use : Programming with the receiver
2. Frequency: 433MHz
3. Code: Dynamic Code
4. Battery: Include Battery
5. Distance: 30-150m(Open Area)
Features
When your remote control is lost, you can buy our remote control and pair it with your receiver, after the remote control is programmed successfully, you will get a new remote control
Compatible Models
Remote Control Model£º
For DOORHAN PREMIUM
For DOORHAN TRANSMITTER-2
For DOORHAN TRANSMITTER-4
For DOORHAN TRANSMITTER -2 PRO
For DOORHAN TRANSMITTER -4 PRO
Receiver Model£º
For Sliding-2100
For Sliding-1300
For Sliding-800
For Sliding-500
For Sliding-2100 pro
For Sliding-1300 pro
For DoorHan Sectional-800 PRO
For DoorHan Sectional-1200
For DoorHan Sectional-1000 PRO
For DoorHan SW-mini
For DOORHAN SE-1200KIT
Access to receiver required. Please make sure you got access to your receiver/opener before purchase.
Note: Please confirm your original remote control brand before purchasing, we will not be responsible for wrong purchase, thank you.
Include
Keychain
Remote Control
Include Battery
Instruction Manual
How to program ?
Program the gate/garage door opener in the same manner as your original remote, see your receiver`s owner`s manual. For a typical DH garage control panel, the programming process is as follows:
1. Press and release the button R on the receiver.
2. The left side of display panel will show 0 then disappears immediately.
3. Press any button twice, coding is completed.
4. Press the transmitter button to test operation.
Note: If you don`t know how to use it, please contact us and we will send you learning videos.
Delete All Codes
1. Turn on the power to DHRE-2 receiver unit.
2. Press CODE button for 10 seconds CODE1 (or SW1) - if you are using CH1, CODE2 (or SW2) - if you are using CH2.
3. LED1 will be flashing 10 seconds then switch off for 2 seconds and flash twice to confirm that the memory is clear.
4. Release the button. All the stored codes including the courtesy light codes should now be deleted. Confirm this by pressing the transmitters previously used to operate the device. There should be no response.
Do you support drop shipping?
Support, we have cooperated with many friends, our packaging will not reveal any information, and the chip will not print text, we only provide products and instructions for use