aHR0cDovL2ZyZWVzaGlwLmNvLmty
- ºê·£µå À̸§: LYBGACNC
- DIY ¿ëÇ°: Àü±â
- ±Ù¿ø: CN (Á¤Ç°)
- ¸ÂÃã °¡´É À¯¹«: YES
- ¸ðµ¨ ¹øÈ£: LY-904
- Áõ¸í¼: ¼¼·ý
- ÆÐÅ°Áö: BOX
- À¯Çü: Á¶ÇÕ
- ½Åû: ÄÄÇ»ÅÍ µµ±¸ Å°Æ®
LY 904 OCA Glue and Polarizer Remover 3 In 1 Pre-heating Separator Glue & Polarizer Removing 220V 110V
Thank you for using our
products. For the safe of use of this new product, Before operating this unit,
please read these instructions completely and save this manual for future use. Please
do not attempt to disassemble or modified the machine!
1.Magnet for shovel glue plate
2.The handle of shovel glue
3.Heated plate
4.Fixed screw
5.Separator thermostat
6.Glue remove thermostat
7.Glue remove thermostat switch
8.Vacuum switch
9.Slide roller
10.Glue remove blade
11.Blade balance adjustment
12.Separator thermostat switch
INSTRUCTIONS
This is a 3 in 1 glue remove
machine, which consist of heated plate, vacuum manual separator, glue remover
function, built-in vacuum pump, only need you plug in power line, then you can
use it.
The operation steps of screen separation :
1. Haul back the lower plate, lock the screw tightly (skid resistance).
2. Turn on the thermostat switch on left, setting the temperature to 80 degree.
3. Put the silica gel on the heated plate holes to holes.
4. Put downwards the screen onto the sillica gel, turn on vacuum switch, the screen being sucked.
5. Adjust steel wire to the height of pressing the glass exactly, keep constant speed to separate LCD and
glass.
6. Take off the LCD, the operation steps of screen separation is.
The operation steps of polarizer remove:
1. Turn on the thermostat switch on right, setting the temperature to 180 degree.
2. Put downwards the screen onto the sillica gel, turn on vacuum switch, the screen being sucked.
3. Put blade on the one end of polarizer, push the plate and then polarizer will fall off.
4. Turn down vacuum switch and take out screen.
PARAMETER
SUPPLY£ºAC220V /AC110V
POWER£º350W
SIZE£º200*330*350MM
WEIGHT£º9.5KG