This 80W laser module is specially designed for laser engraving and cutting. It is widely used in laser engraving machines and is compatible with most 2-axis, 3-axis, and 4-axis controller boards on the market.
Specification:
Laser:80W
Optical power output:9.5W~11W
Current:3.8A
Laser tube:2xLD+FAC+C-Lens
Laser wavelength:445nm¡¾5nm
Beam shape:Dot ( Fixed Focus )
Focus:0.069mm*0.157mm
PWM/TTL input:0-5V
Input interface:XH2.54-3Pin (+,-, PWM/TTL)
TTL output power:> 1K HZ output power = continuous power x 40%
Working frequency:<30KHz
Laser class:Class IV
Safe temperature range:15 ¡É ~40 ¡É
Life time:15000~20000 hours
Anti-static: Up to 25kV static electricity can be eliminated
Shell: Frosted material, good heat dissipation
Magnetic blower protective shell:Constitutes an air duct, has good heat dissipation, and protects eyes and lasers
Engravable materials: MDF, balsa, paper, wood, fabric, plastic, leather, plywood, foam paper, anodized aluminum, stainless steel
Cuttable Materials: Cardboard, Nonwoven, Plywood, MDF, Acrylic, Some Thin Plastic Sheets
Feature:
1.Fixed focus, focal length 50mm, no need to focus, easy to use.
2.Mirror stainless steel can be directly engraved.
3.Can cut 8mm plywood and 9mm pine board at one time Can cut up to 10mm plywood/20mm wood/15mm acrylic (black), directly engraving mirror stainless steel.
4.Eye Protection Design - With protective cover on the laser head, can protect your eye from UV, when watch the visible magical engraving process.
5.Thanks to the red protective cover on the laser head, it is possible to work without laser goggles.
Package List:
1 x laser module