Why Choose CPE8881 Wirelss Bridge?
The wireless bridge is a 100Mbps PoE output outdoor wireless WiFi bridge, with a built-in 14dBi dual polarized directional antenna (60 º horizontal lobe and 25 º vertical lobe). It has stronger signal strength and wider wireless coverage. It supports 2.5KM 5GHz long-distance WiFi extenders and LED indicators to meet the requirements of a variety of wireless transmission schemes. The maximum transmission speed between the two bridges is 450Mbps. The maximum network speed can reach 100Mbps. CPE8881 integrates Passive Ethernet Power Supply (PoE) for easy installation and cost reduction. Therefore, it can be installed in areas where power sockets are not available, and it is waterproof, dustproof and lightning proof.
5.8G Technology & 450Mbps Transmission Speed
5.8G frequency makes long-range WiFi bridge has better anti-interference performance, good compatibility, and strong anti-adjacent channel interference, better than 2.4 G traditional CPE.
The transmission speed between 2 wireless WiFi bridges max is 450Mbps, but the highest wired network speed that can be achieved max is 100Mbps via RJ45 port. To achieve the wireless bridge function, one needs to act as a slave bridge and the other one as a master bridge.
14dBi Antenna
Built in 14dBi directional antenna can significantly improve the transmission and reception performance of wireless signals.
Point to Point Up to 2.5KM
Multi-Mode wireless wifi bridge with an ethernet port and LED indicator. Support wireless AP, wireless signal transmit before 2 houses with 2.5KM distance.
Outdoor IP65 Weatherproof
UeeVii CPE8881 bridge IP65 weatherproof is very suitable for outdoor use, with rain, dust, and antifreeze.
Set up super strong monitoring system
CPE8881 is an 5.8G outdoor CPE with LED display. it work in pairs for point to point connection,point to multi connection,make more IP camera can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
Any place required security monitoring by cameras Point to Point/Multi-Point connection Client Bridge for Elevator Monitor, surveillance networks. Outdoor CPE Connect an IP Surveillance Camera to a secondary port and utilize its long-range connectivity to send surveillance video back through the wireless network for extended surveillance coverage.
There are many ways to use it. You can refer to the case in the picture:
Widely Applications
Extend your house network to the second building, such as garages, barns, shops, and even neighbors, without having to layout network cables, saving costs.
How To Use Product
Wireless bridge LED indicator can show signal strength, easy to set via computer. Setting CPE master mode as AP mode, slave mode as Client mode. Click " Scan" in the settings of the slave mode, scan to the CPE SSID of the master mode to be connected, and then make the connection settings. It transmits via wireless signal, reducing the trouble of wiring cable.
How to complete the matching of UeeVii CPE8881?
Specification:
Material: ABS
Dimension:21cm*9.5cm*4.0cm/8.27"*3.7"*1.57"
Color: White
FLASH Memory:8MB
DDR Memory:32MB
5.8G WiFi:Up to 450Mbps
RF Frequency Range:5180 GHz ~ 5825 GHz
Power Supply:Power Adapter DC 12V 1A
5GHz Channel: 149,153,157,161,165
Operating Temperature:-20~+70°C
Storage Temperature:-40~+85°C
Technical Support & Note:
The installation of this device requires some network knowledge. When you cannot connect to them, please contact us or look for a professional to assist. 2 CPEs have been paired before sending it to you, you don¡¯t need to pair them again. When the CPE is reset, IP of this setting is 192.168.0.1. After resetting, you can reset the IP address after accessing through 192.168.0.1. Get the latest version of the PDF manual by contacting us.
Package List:
2*8881 Wireless Bridge
2*POE Power Adapter (DC 12V 1A)
4*Plastic Hoop
1*Quick Start Guide