RS5135 DC 12-24V Red 5 Digit 0.56" LED Panel Counter Meter Up Plus Totalizer 0-99999 Measuring Tool
Feature:
RS5135 is an accumulating-type electronic counter, which can be connected with external mechanical switch. NPN normally open type sensor is used as signal input to realize the purpose of counting statistical quantities.
RS5135 power supply using DC 12-24V power supply, internal control unit using imported microprocessor, strong anti-interference ability, suitable for a variety of harsh industrial occasions, can ensure the counter stable, reliable, continuous work.
The 5-bit 0.56 inch (1.42CM) large size LED display is more convenient to use
Blackout memory function, counting speed 100 times/s, counting range up to 0-99999PCS
Products are suitable for various industrial occasions, such as production line statistics output, packaging measurement, human flow statistics and so on.
Product parameters:
Working power supply and power consumption:
Working voltage: DC12V-24V;
Power consumption: <2W
Display mode: five-digit 0.56 inch highlighted digital tube display
Counting range: 0-99999PCS
Counting speed: 100 times/second
Reset function: The external contact switch is required as reset input, and the low level is valid
Operating environment: -10° C to 50° C
Power failure memory: counting the value of power failure to keep long-term memory.
Appearance dimension (mm) : 79(length)×43(width)×26(thickness)
Installation method and size (mm) : Open hole installation :75(length)×39.5(width)
Wiring guide for four terminal counter:
1: Reset the input, connect with the negative terminal of the power supply (3) through the point switch, press it, then the value of the count is reset.
2: Signal input, available contact or sensor signal input, can be matched with mechanical switch, foot switch, travel switch, proximity switch, Hall switch, photoelectric switch and so on to choose NPN normally open type.
3: negative terminal of DC power supply
4: positive terminal of DC power supply
Note:
1 contact signal: generally refers to mechanical switch, such as touch switch, travel switch, foot switch, switch connected once is equivalent to a short circuit, produce a count signal. The input signal is low valid. Do not input high voltage signal.
The standard counter speed of 100 times/s, high speed 500 times/s can be customized. The high speed is reached when the duty cycle is 1:1. Duty cycle refers to the proportion of time that a signal is high to low.
3. Contact input should be reliable. If multiple counts are caused by contact bounce, please connect 2.2UF capacitors at both ends of the contact in parallel to eliminate them
4. Keep the signal input line as short as possible. Avoid running with other strong wires and power wires. Use shielded wires if necessary
Product list:
1X counter